PIC24F04KA201 Datasheet, PDF (134/224 Pages) Microchip Technology – 14/20-Pin General Purpose, 16-Bit Flash Microcontrollers with nanoWatt XLP™ Technology

PIC24F04KA201 FAMILY
REGISTER 16-3: I2C1MSK: I2C1 SLAVE MODE ADDRESS MASK REGISTER
U-0
U-0
U-0
U-0
U-0
U-0
R/W-0
—
—
—
—
—
—
AMSK9
bit 15
R/W-0
AMSK8
bit 8
R/W-0
AMSK7
bit 7
R/W-0
AMSK6
R/W-0
AMSK5
R/W-0
AMSK4
R/W-0
AMSK3
R/W-0
AMSK2
R/W-0
AMSK1
R/W-0
AMSK0
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-10
bit 9-0
Unimplemented: Read as ‘0’
AMSK<9:0>: Mask for Address Bit x Select bits
1 = Enable masking for bit x of incoming message address; bit match not required in this position
0 = Disable masking for bit x; bit match required in this position
REGISTER 16-4: PADCFG1: PAD CONFIGURATION CONTROL REGISTER
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
bit 15
U-0
U-0
—
—
U-0
—
bit 8
U-0
U-0
U-0
R/W-0
R/W-0
U-0
—
—
—
SMBUSDEL OC1TRIS^(1,2)
—
bit 7
U-0
U-0
—
—
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-5
bit 4
bit 2-0
Unimplemented: Read as ‘0’
SMBUSDEL: SMBus SDA Input Delay Select bit
1 = The I²C™ module is configured for a longer SMBus input delay (nominal 300 ns delay)
0 = The 1²C module is configured for a legacy input delay (nominal 150 ns delay)
Unimplemented: Read as ‘0’
Note 1: To enable the actual OC1 output, the OCPWM1 module has to be enabled.
2: Bit 3 is described in related chapters.
DS39937B-page 132
Preliminary
© 2009 Microchip Technology Inc.