PIC16LF876A-I Datasheet, PDF (186/234 Pages) Microchip Technology – 28/40/44-Pin Enhanced Flash Microcontrollers

PIC16F87XA
FIGURE 17-9:
CAPTURE/COMPARE/PWM TIMINGS (CCP1 AND CCP2)
RC1/T1OSI/CCP2
and RC2/CCP1
(Capture Mode)
50
51
52
RC1/T1OSI/CCP2
and RC2/CCP1
(Compare or PWM Mode)
53
54
Note: Refer to Figure 17-3 for load conditions.
TABLE 17-7: CAPTURE/COMPARE/PWM REQUIREMENTS (CCP1 AND CCP2)
Param
No.
Symbol
Characteristic
Min
Typ† Max Units
Conditions
50* TCCL CCP1 and CCP2 No Prescaler
0.5 TCY + 20 — — ns
Input Low Time
Standard(F)
With Prescaler
Extended(LF)
10
— — ns
20
— — ns
51* TCCH CCP1 and CCP2 No Prescaler
0.5 TCY + 20 — — ns
Input High Time
Standard(F)
With Prescaler
Extended(LF)
10
— — ns
20
— — ns
52* TCCP CCP1 and CCP2 Input Period
3 TCY + 40 — — ns N = prescale value
N
(1, 4 or 16)
53* TCCR CCP1 and CCP2 Output Rise Time Standard(F)
—
10 25 ns
Extended(LF)
—
25 50 ns
54* TCCF CCP1 and CCP2 Output Fall Time Standard(F)
—
10 25 ns
Extended(LF)
—
25 45 ns
* These parameters are characterized but not tested.
† Data in “Typ” column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance only and are
not tested.
DS39582C-page 186
 2001-2013 Microchip Technology Inc.