PIC16LF876A-I Datasheet, PDF (169/234 Pages) Microchip Technology – 28/40/44-Pin Enhanced Flash Microcontrollers

16.9 MPLAB ICE 2000
High Performance Universal
In-Circuit Emulator
The MPLAB ICE 2000 universal in-circuit emulator is
intended to provide the product development engineer
with a complete microcontroller design tool set for PIC
microcontrollers. Software control of the MPLAB ICE
2000 in-circuit emulator is advanced by the MPLAB
Integrated Development Environment, which allows
editing, building, downloading and source debugging
from a single environment.
The MPLAB ICE 2000 is a full-featured emulator sys-
tem with enhanced trace, trigger and data monitoring
features. Interchangeable processor modules allow the
system to be easily reconfigured for emulation of differ-
ent processors. The universal architecture of the
MPLAB ICE in-circuit emulator allows expansion to
support new PIC microcontrollers.
The MPLAB ICE 2000 in-circuit emulator system has
been designed as a real-time emulation system with
advanced features that are typically found on more
expensive development tools. The PC platform and
Microsoft^® Windows 32-bit operating system were
chosen to best make these features available in a
simple, unified application.
16.10 MPLAB ICE 4000
High Performance Universal
In-Circuit Emulator
The MPLAB ICE 4000 universal in-circuit emulator is
intended to provide the product development engineer
with a complete microcontroller design tool set for high-
end PIC microcontrollers. Software control of the
MPLAB ICE in-circuit emulator is provided by the
MPLAB Integrated Development Environment, which
allows editing, building, downloading and source
debugging from a single environment.
The MPLAB ICD 4000 is a premium emulator system,
providing the features of MPLAB ICE 2000, but with
increased emulation memory and high speed perfor-
mance for dsPIC30F and PIC18XXXX devices. Its
advanced emulator features include complex triggering
and timing, up to 2 Mb of emulation memory, and the
ability to view variables in real-time.
The MPLAB ICE 4000 in-circuit emulator system has
been designed as a real-time emulation system with
advanced features that are typically found on more
expensive development tools. The PC platform and
Microsoft Windows 32-bit operating system were cho-
sen to best make these features available in a simple,
unified application.
PIC16F87XA
16.11 MPLAB ICD 2 In-Circuit Debugger
Microchip’s In-Circuit Debugger, MPLAB ICD 2, is a
powerful, low-cost, run-time development tool,
connecting to the host PC via an RS-232 or high-speed
USB interface. This tool is based on the Flash PIC
MCUs and can be used to develop for these and other
PIC microcontrollers. The MPLAB ICD 2 utilizes the in-
circuit debugging capability built into the Flash devices.
This feature, along with Microchip’s In-Circuit Serial
Programming^TM (ICSP^TM) protocol, offers cost effective
in-circuit Flash debugging from the graphical user inter-
face of the MPLAB Integrated Development
Environment. This enables a designer to develop and
debug source code by setting breakpoints, single-
stepping and watching variables, CPU status and
peripheral registers. Running at full speed enables test-
ing hardware and applications in real-time. MPLAB
ICD 2 also serves as a development programmer for
selected PIC devices.
16.12 PRO MATE II Universal Device
Programmer
The PRO MATE II is a universal, CE compliant device
programmer with programmable voltage verification at
VDDMIN and VDDMAX for maximum reliability. It features
an LCD display for instructions and error messages
and a modular detachable socket assembly to support
various package types. In Stand-Alone mode, the
PRO MATE II device programmer can read, verify, and
program PIC devices without a PC connection. It can
also set code protection in this mode.
16.13 PICSTART Plus Development
Programmer
The PICSTART Plus development programmer is an
easy-to-use, low-cost, prototype programmer. It con-
nects to the PC via a COM (RS-232) port. MPLAB
Integrated Development Environment software makes
using the programmer simple and efficient. The
PICSTART Plus development programmer supports
most PIC devices up to 40 pins. Larger pin count
devices, such as the PIC16C92X and PIC17C76X,
may be supported with an adapter socket. The
PICSTART Plus development programmer is CE
compliant.
 2001-2013 Microchip Technology Inc.
DS39582C-page 169