801-2-31-A40 Datasheet, PDF (11/28 Pages) Magnetrol International, Inc. – KotronTM II Series 801 RF Capacitance Transmitter For Level/Flow/Volume

UNIT CONFIGURATION cont.
MEASURED VALUES MENU
This menu is used to view present values being measured
in the Series 801. The menu layout is shown below.
Series 801
Measured Values
Level
Present measurement
Volume (Volume mode only)
Present measurement
Flow (Flow mode only)
Present measurement
Totalizer (Flow mode only)
Present measurement
Loop
Present measurement
Calculation
Present measurement
View Data Log
Present measurement
Previous Menu
Please refer to the above menu layout for the configu-
ration instructions below.
From the Default Display, press ENT to view the Measured
Values menu. Measured Values and the UP/DOWN arrows
will be displayed.
To view the Measured Values - Press ENT at the
Measured Values display. Level will be displayed if level
mode has been selected. (Level or Volume can be dis-
played if volume mode has been selected. Level, Flow or
Totalizer can be displayed if flow mode has been selected).
To view the Present Measurement: - Press ENT. After
reviewing, press ENT to return to Level, Volume (Volume
Mode Only) or Flow (Flow Mode Only).
To scroll down to the next Measured Value - Press the
DOWN arrow. Pressing the UP arrow scrolls up the menu.
Press ENT at any measured value that you wish to review.
If you do not wish to view the measured values at this time,
press DEL up to three times from anywhere in the display
and the unit will return to the default display. Pressing ENT at
Previous Menu display, will cause the unit to return to
Measured Values.
11