5-103169-3 Datasheet, PDF (95/96 Pages) Tyco Electronics – AMPMODU Headers and Receptacles, .100 [2.54] Centerline

Closed Top Entry,
End and Side Stackable,
Low Profile, .100 x .100
[2.54 x 2.54] Centerline,
.100 [2.54] Tine Spacing
AMPMODU Interconnection System
Mod IV Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline
.020
[0.51]
(Standoffs)
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze,
plated as follows:
Plating A — Duplex .000030 [0.00076]
gold on contact area, .000150-.000300
[0.00381-0.00762] matte tin on solder
area all over .000050 [0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
.050
[1.27]
Max.
Typ.
.198
[5.03]
A
.100
[2.54]
Typ.
.100
[2.54]
Typ.
.245
[6.22]
.100±.003
[2.540.08]
.148
[3.77]
Typ.
.107
[2.72]
Typ.
(Localized
Gold Plate
Area)
Point of
Contact
.100
[2.54]
Typ.
.125±.010
[3.18±0.25]
Typ.
.100
B
[2.54]
Typ.
.035±.003
[0.89±0.08]
Dia.
Recommended PC Board Hole Layout
Related Product Data
Mateable Headers —
Refer to the Mating Post Selection
Guide — page 90
Performance Characteristics —
page 174
Technical Documents — page 276
Product Specification
108-25022
Application Specification
114-25018
No. of
Pos.
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
Dimensions
A
B
.100 [2.54]
—
.200 [5.08]
.100 [2.54]
.300 [7.62]
.200 [5.08]
.400 [10.16]
.300 [7.62]
.500 [12.70]
.400 [10.16]
.600 [15.24]
.500 [12.70]
.700 [17.78]
.600 [15.24]
.800 [20.32]
.700 [17.78]
.900 [22.86]
.800 [20.32]
1.000 [25.40]
.900 [22.86]
1.100 [27.94]
1.000 [25.40]
1.200 [30.48]
1.100 [27.94]
1.300 [33.02]
1.200 [30.48]
1.400 [35.56]
1.300 [33.02]
1.500 [38.10]
1.400 [35.56]
1.600 [40.64]
1.500 [38.10]
1.700 [43.18]
1.600 [40.64]
1.800 [45.72]
1.700 [43.18]
1.900 [48.26]
1.800 [45.72]
2.000 [50.80]
1.900 [48.26]
Contact Plating/Part Nos.
Plating A
Plating B
5-534998-1
5-535598-2
5-534998-2
5-535598-3
5-534998-3
5-535598-4
5-534998-4
5-535598-5
5-534998-5
5-535598-6
5-534998-6
5-535598-7
5-534998-7
5-535598-1
5-534998-8
5-535598-8
5-534998-9
5-535598-9
6-534998-0
6-535598-0
6-534998-1
6-535598-1
6-534998-2
6-535598-2
6-534998-3
6-535598-3
6-534998-4
6-535598-4
6-534998-5
6-535598-5
6-534998-6
6-535598-6
6-534998-7
6-535598-7
6-534998-8
6-535598-8
6-534998-9
6-535598-9
7-534998-0
7-535598-0
Plating C
5-535585-3
5-535585-4
5-535585-5
5-535585-6
5-535585-1
5-535585-2
5-535585-7
5-535585-8
5-535585-9
6-535585-0
6-535585-1
6-535585-2
6-535585-3
6-535585-4
6-535585-5
6-535585-6
6-535585-7
6-535585-8
6-535585-9
7-535585-0
Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle
assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension.
5
Note: All part numbers are RoHS compliant.
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
179
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208