5-103169-3 Datasheet, PDF (56/96 Pages) Tyco Electronics – AMPMODU Headers and Receptacles, .100 [2.54] Centerline

AMPMODU Interconnection System
Right-Angle, 4-Sided
.025 [0.64] Sq. Posts
Pin Header
with Latches
Universal Ejection Style Pin Headers, Military, Center and Dual Polarized,
.100 x .100 [2.54 x 2.54] Centers (Continued)
.253
[6.43]
.150
[3.81]
.100
[2.54]
.165
[4.19]
.336 _.315
[8.53] _[8.00]
Pos. No. 1 Indicator
.150
[3.81]
A
B
C
.025
[0.64]
.050
[1.27]
.549
[13.94]
.190
[4.83]
.100
[2.54]
.025
[0.64]
Dia.
.240
[6.10]
.100
[2.54]
.025 _.107
[0.64] _[2.72]
.289
[7.34]
.096
[2.44]
.108
[2.74]
.038
[0.97]
E
Typ.
Solder Tail
5
.195
[4.95]
D
Note: Used with Header (optional)
Latch (sold separately)
Part Number 1825851-1
Pin Header
without Latches
Material and Finish
Housing & Latches — Black
thermoplastic, 94V-0 rated
Contacts — Brass or phosphor bronze
(at Tyco Electronics’ option); Duplex
.000030 [0.00076] gold on mating end,
.000100 [0.00254] min. tin on
termination end, with entire contact
underplated .000050 [0.00127] nickel
No. of
Positions
10
14
16
20
24
A
.700
17.78
.900
22.86
1.000
25.40
1.200
30.48
1.400
35.56
B
1.100
27.94
1.300
33.02
1.400
35.56
1.600
40.64
1.800
45.72
Dimensions
C
1.260
32.00
D
.860
21.84
1.460
37.08
1.060
26.92
1.560
39.62
1.180
29.46
1.760
44.70
1.360
34.54
1.960
49.78
1.560
39.62
E
.110 [2.79]
.155 [3.94]
.110 [2.79]
.155 [3.94]
.110 [2.79]
.155 [3.94]
.110 [2.79]
.155 [3.94]
.110 [2.79]
.155 [3.94]
Part Number
(Without Latches)
5102160-1
5102162-1
2-5102160-2*
2-5102162-2*
5102160-3
—
5102160-4
—
5102160-5
—
Related Product Data
Electrical Characteristics —
page 134
Mateable Connectors —
AMPMODU Wire-Applied
Receptacles — page 220
26
1.500
38.10
1.900
48.26
2.060
52.32
1.660
42.16
.110 [2.79]
.155 [3.94]
5102160-6
2-5102162-6*
34
1.900
48.26
2.300
58.42
2.460
62.48
2.060
52.32
.110 [2.79]
.155 [3.94]
5102160-8
5102162-8
40
2.200
55.88
2.600
66.04
2.760
70.10
2.360
59.94
.110 [2.79]
.155 [3.94]
5102160-9
—
50
2.700
68.58
3.100
78.74
3.260
82.80
2.860
72.64
.110 [2.79]
.155 [3.94]
1-5102160-0
1- 5102162-0
Mounting Information
4-24 self-tapping screws
and 2-56 bolts and nuts are
available for mounting
straight-thru pin headers of
pc boards. Typical applica-
tions and part nos. for
ordering this hardware are
presented below.
Note: 2-56 bolts and nuts may be
used to mount pin headers with and
without latches. If latches are to be
used, the bolts must be positioned in
the pin header before the latches are
installed.
Note: All part numbers are RoHS
compliant.
Notes: 1. Pin headers in 10- and 14-position sizes have only one slot for snap-in polarizer (military polarization),
located as shown.
Notes: 2. Pin headers in 10-position size have only slot for dual polarization, located as shown.
*Blue housing.
Latch
(See Note at left.)
2-56
Bolt & Nut
(2 Each Req‘d.)
4-24
Self-Tapping
Screw
(2 Req‘d.)
.256
[6.50]
Pin Header Mounting using 4-24 Self-Tapping Screws:
Part No. 19156-1 (for .062 [1.57] Thick PC Board)
Part No. 19156-2 (for .093 [2.36] Thick PC Board)
Part No. 19156-3 (for .125 [3.18] Thick PC Board)
Pin Header Mounting with 2-56 Bolts and Nuts:
Part No. 746383-1 (Bolt Only)
Kit No. 102198-1 (Bolt and Nut, 2 Each per Kit)
140
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208