5-103169-3 Datasheet, PDF (68/96 Pages) Tyco Electronics – AMPMODU Headers and Receptacles, .100 [2.54] Centerline

AMPMODU Interconnection System
ACTION PIN Post
Replacement Tooling
Rear Insertion/Extraction Tool
No. 265871-7 (Ref. 408-2636)
Includes:
Impact Tool No. 380392-8
Removal Tool No. 265964-1
Replacement Tip No. 308554-1
Application Tooling for AMPMODU Headers with ACTION PIN Posts
Single-Row Connector
Seating Tools
Tooling Assembly No. 91171-1
is used to install single-row
AMPMODU headers with
ACTION PIN posts into
PC boards.
Pin headers with
ACTION PIN posts allow
high speed, solderless
back-plane construction
through press-fit applica-
tion. Press fitting connectors
to printed circuit boards
requires special seating
tools which transfer applica-
tion force directly to the
contacts.
Force applied to the tool
to seat the connectors
can be provided by the
Tyco Electronics seating
machines shown on this
page.
For tooling information,
call the Tyco Electronics
Automation Group
1-800-722-1111.
Double-Row Connector
Seating Tools
Header Size
Tool
(No. of Pos.) Assembly No.
4
91170-1
6
91170-1
8
91170-2
12
91170-5
14
91170-6
16
91170-7
20
91170-9
24
1-91170-1
30
1-91170-4
36
1-91170-7
40
1-91170-9
50
2-91170-4
60
2-91170-9
80
3-91170-2
96
3-91170-5
100
3-91170-6
120
3-91170-8
140
4-91170-0
200
4-91170-2
Triple-Row Connector
Seating Tools
Header Size
Tool
(No. of Pos.) Assembly No.
96
91169-8
105
91169-6
120
91169-7
150
91169-3
195
91169-2
204
91169-1
210
91169-5
300
91169-9
5
BMEP 5T
AEP 6T
ASG Servo Electric Presses
Tyco Electronics offers a
wide range of servo-electric
presses for the application
of press-fit connectors.
Systems are available with
varying force capacity,
board size capacity and
process capability. Each
system features real-time
force feedback and PC con-
trol to allow the highest level
of control and traceability.
Every connector pressed is
monitored to confirm that
maximum force is not
exceeded and minimum
force is met. Each system
controls force, height and
speed to allow termination
of the pressing cycle by
force or height parameters.
Complete SPC data is avail-
able as each connector
press cycle is monitored
and stored.
Please see the matrix
below and contact
Tyco Electronics Automation
Group at 1-800-722-1111 for
assistance in understanding
which system will best meet
your needs.
Press Model
BMEP 3T
BMEP 5T
MEP 6T
MEP 12T
AEP 12T
AEP 6T
Description
Semi-automatic, benchtop
servo-electric press
Semi-automatic, benchtop
servo-electric press
Semi-automatic, stand-alone
servo-electric press
Semi-automatic, stand-alone
servo-electric press
Automatic, inline
servo-electric press
Automatic, stand alone
servo-electric press
Max Pressing Force
tons [kN]
3 [26.7]
5 [44.5]
6 [53.4]
12 [106.8]
12 [106.8]
6 [53.4]
Max Board Size (L x W)
in [mm]
18 x 24 [460 x 610]
18 x 24 [460 x 610]
24 x 36 [610 x 914]
30 x 36 [ 762 x 914]
36 x 48 [914 x 1219]
30 x 36 [762 x 914]
152
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Note: All part numbers are RoHS compliant.
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208