5-103169-3 Datasheet, PDF (21/96 Pages) Tyco Electronics – AMPMODU Headers and Receptacles, .100 [2.54] Centerline

AMPMODU Interconnection System
.025 [0.64] Square
Right-Angle Posts
Breakaway Headers—Unshrouded, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Headers with Solder Tails
.042
[1.07]
(2 Plc.)
A
B
.100
[2.54]
Typ.
D
.090
[2.29]
.238
[6.05]
.100
[2.54]
Material and Finish
Housing — Black thermoplastic, 94V-0
rated, high temperature compatible
Posts — Phosphor bronze, duplex
plated .000030 [0.00076] gold on
contact area, .000100-.000200
[0.00254-0.00508] tin on solder tail,
with entire post underplated .000050
[0.00127] nickel
Performance Characteristics
(Board Retention Tails)
Insertion Force — 12 lb [53.4N] max.
Retention Force — .25 lb [1.11N] min.
Related Product Data
Mateable Connectors —
Refer to the Mating Post Selection
Guide — page 90
.100*
[2.54]
.045
[1.14]
Ref.
E Ref.
(Contact
Area)
.140
[3.56]
.110
.100
[2.54]
(CL of Hole Pattern)
[2.79]
( ^CLof Stencil Pattern)
.035±.003
[0.89±0.08]
Dia.
Typ.
.090±.002
[2.29±0.05] ^.030±.002
[0.76±0.05]
Recommended PC Board Mounting Pattern
(Plated)
Recommended Hole Size
Before Plating
.045±.001
[1.14±0.02]
Dia.
Typ.
(for .062 [1.57] thick PC board; .008 [.203] thick stencil)
*±.003 [±0.08] tolerances not to accumulate within one connector pattern.
C
.100
[2.54]
Headers with Board Retention Tails
A
.042
[1.07]
B
(2 Plc.)
D
.090
[2.29]
.238
Technical Documents — page 276
[6.05]
.100
[2.54]
See mating connector for applicable
product and application specifications.
E Ref.
(Contact
.075
Area)
.100*
[2.54]
[1.91]
Typ.
.170
.140
[3.56]
.100
[2.54]
( ^CL of
[4.32]
( CLof Stencil Pattern)
.040±.003
[1.02±0.08]
Dia.
Typ.
Hole
(Plated)
Pattern)
.150±.002 _.030±.002
[3.81±0.05] _{[0.76±0.05]}
Recommended PC Board Mounting Pattern
Recommended Hole Size
Before Plating
.045±.001
[1.14±0.02]
Dia.
Typ.
(for .062 [1.57] thick PC board; .008 [.203] thick stencil)
*±.003 [±0.08] tolerances not to accumulate within one connector pattern.
C
.100
[2.54]
Header
Style
With
Solder Tails
(See Notes
1 and 2.)
No. of
Pos.
2
80
Dimensions
A
B
.084 [2.13]
3.984 [101.19]
—
3.900 [99.06]
C = .120 [3.05]
D = .230 [5.84]
E = .185 [4.70]
Part Nos.
5-146308-1
9-146308-0
C = .110 [2.79]
D = .318 [8.08]
E = .200 [5.08]
Part Nos.
5-146309-1
9-146309-0
With Board
Retention Tails
(See Note 2.)
2
.084 [2.13]
—
80
3.984 [101.19]
3.900 [99.06]
5-146310-1
9-146310-0
5-146311-1
9-146311-0
Notes: 1. Headers without retention tails may be broken to the desired number of positions using Tool Kit No. 314818-1 (not shown).
Notes: 2. Headers are also available in sizes 4 thru 78 positions. When ordering, add the prefix and/or suffix (dash) numbers plus 5- -0 to
the base part number that corresponds with the number of positions per row. For example, the complete part number for a 16-
position header with solder tails (C dimension .120 [3.05)] would be 5-146308-8. The complete part number for a 40-position header
with board retention tails (C dimension .120 [3.05]) would be 7-146310-0. This part numbering system applies only to this page.
Board Retention
using Swaged Tails
(All Header Sizes)
5
Note: All part numbers are RoHS compliant.
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
105
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208