5-103169-3 Datasheet, PDF (18/96 Pages) Tyco Electronics – AMPMODU Headers and Receptacles, .100 [2.54] Centerline

5
AMPMODU Interconnection System
Breakaway Headers—Unshrouded, Single-Row, .100 [2.54] Centerline
.025 [0.64] Square
Headers with Solder Tails
Straight Posts
A
B
Material and Finish
Housing — Black thermoplastic, 94V-0
rated, high temperature compatible
Posts — Phosphor bronze, plated as
follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000100-
.000200 [0.00254-0.00508] tin on solder
tail, with entire post underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000100-
.000200 [0.00254-0.00508] tin on solder
tail, with entire post underplated .000050
[0.00127] nickel
Plating C — .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel
Performance Characteristics
(Board Retention Tails)
Insertion Force — 12 lb [53.4N] max.
Retention Force — .25 lb [1.11N] min.
Related Product Data
Mateable Connectors —
Refer to the Mating Post Selection
Guide — page 90
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
.025
[0.64]
D
Typ.
C
.035±.003
[0.89±0.08]
Dia.
Typ.
.100*
[2.54]
(Plated)
Recommended Hole Size
Before Plating
.045±.001
[1.14±0.02]
Dia.
Typ.
.045
B
[1.14]
Typ.
.030±.002
[0.76±0.05]
.090±.002
[2.29±0.05]
Recommended PC Board Mounting Pattern
(for .062 [1.57] thick PC board; .008 [.203] thick stencil)
*±.003 [±0.08] tolerances not to accumulate within one connector pattern.
Headers with Board Retention Tails
A
B
E Ref.
(Contact Area)
.090
[2.29]
.025
[0.64]
Typ.
E Ref.
D
(Contact Area)
C
(see
note 3)
.090
[2.29]
.040±.003
[1.02±0.08]
Dia.
Typ.
.100*
[2.54]
(Plated)
Recommended Hole Size
Before Plating
.045±.001
[1.14±0.02]
Dia.
Typ.
.045
B
[1.14]
Typ.
.030±.002
[0.76±0.05]
.150±.002
[3.81±0.05]
Recommended PC Board Mounting Pattern
(for .062 [1.57] thick PC board; .008 [.203] thick stencil)
*±.003 [±0.08] tolerances not to accumulate within one connector pattern.
Header
Style
With
Solder Tails
(See Notes
1 and 2.)
No. of
Pos.
Dimensions
A
B
1
.084 [2.13]
—
C = .090 [2.29]
D = .230 [5.84]
E = .185 [4.70]
Post Plating/Part Nos.
Plating A Plating B Plating C
5-146285-1 5-146284-1 5-146282-1
C = .120 [3.05]
D = .230 [5.84]
E = .185 [4.70]
Post Plating/Part Nos.
Plating A Plating B Plating C
5-146281-1 5-146280-1 5-146278-1
C = .125 [3.18]
D = .318 [8.08]
E = .200 [5.08]
Post Plating/Part Nos.
Plating A Plating B Plating C
5-146277-1 5-146276-1 5-146274-1
40
3.984 [101.19] 3.900 [99.06] 9-146285-0 9-146284-0 9-146282-0 9-146281-0 9-146280-0 9-146278-0 9-146277-0 9-146276-0 9-146274-0
With Board
Retention Tails
(See Notes
2 and 3.)
3
.284 [7.21]
.200 [5.08] 5-146297-3 5-146296-3 5-146294-3 5-146293-3 5-146292-3 5-146290-3 5-146289-3 5-146288-3 5-146286-3
40
3.984 [101.19] 3.900 [99.06] 9-146297-0 9-146296-0 9-146294-0 9-146293-0 9-146292-0 9-146290-0 9-146289-0 9-146288-0 9-146286-0
Notes: 1. Headers without retention tails may be broken to the desired number of positions using Tool Kit No. 314818-1 (not shown).
2. Headers are also available in sizes 2 thru 39 positions (with Solder Tails) and 4 thru 39 positions (with Board Retention Tails). When ordering, add the prefix and/or suffix (dash)
numbers plus 5- -0 to the base part number that corresponds with the desired size. For example, the complete part number for an 8-position header with solder tails (C dimension
.090 [2.29], post plating A) would be 5-146285-8. The complete part number for a 26-position header with board retention tails (C dimension .120 [3.05], post plating B) would
be 7-146292-6. This part numbering system applies only to this page.
3. For C dimensions .120 [3.05] and .125 [3.18], board retention using kinked tails are for headers 6 positions and smaller; headers 7 positions and larger use swaged tails.
Headers with a C dimension of .090 [2.29] have swaged tails for all sizes.
102
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Note: All part numbers are RoHS compliant.
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208