5-103169-3 Datasheet, PDF (79/96 Pages) Tyco Electronics – AMPMODU Headers and Receptacles, .100 [2.54] Centerline

AMPMODU Interconnection System
.025 [0.64] Square Posts
Bandolier Posts (Uninsulated)
Material and Finish
Bandolier — Brass
Posts — Phosphor bronze, plated as
follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000100-
.000200 [0.00254-0.00508] tin on solder
area, with entire post underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000100-
.000200 [0.00254-0.00508] tin on solder
area, with entire post underplated .000050
[0.00127] nickel
Plating C — .000100-.000200 [0.00254-
0.00508] tin over .000050 [0.00127] nickel
on entire post
Related Product Data
Mateable Connectors —
Refer to the Mating Post Selection
Guide — page 90
Accessories
End Shrouds — page 203
Application Tooling — page 153
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
Strip Form Posts (Uninsulated)
B
C
.010
[0.25]
Typ.
CL
of Star
.100*
[2.54]
A
.010
[0.25]
.070
[1.78]
Bandolier
Post
.020
[0.51]
Typ.
.015
[0.38]
.100
[2.54]
.080
[2.03]
.100
[2.54]
D
±.002
[±0.05]
Dia.
Recommended
Plated Hole Size
for Tin Plated
Through Hole
PC Pad
[ ] ^.1^.00.⁴2⁶⁸2^0++-_-^{..0000..00103658}
.097
[2.46]
Max.
Customer
Board
Dimensions
A
B
C
Post Plating/Part Nos.
Bandolier
D
Plating A Plating B Plating C ^{Insertion Head}
.353 [8.97]
.318 [8.08]
.270 [6.86]
.183 [4.65]
.071 [1.80]
.071 [1.80]
.071 [1.80]
.097 [2.46]
.424 [10.77]
.389 [9.88]
.341 [8.66]
.280 [7.11]
.034 [0.86]
.034 [0.86]
.034 [0.86]
.031 [0.79]
.031 [0.79]
5-103577-1
5-103577-3
5-103577-5
5-146079-1
—
6-103577-3
6-103577-5
6-103577-7
—
—
5-103577-7
5-103577-9
6-103577-1
—
6-146079-3
904592-1
904591-1
904590-1
—
—
Notes: 1. Posts can be applied using Hand Tool 91419-1.
*Point of measurement for plating thickness.
2. Approximate posts per reel—30,000.
3. The Bandolier Insertion head can be used on the Comp-U-Sertor II machine or the Modular Insertion
System Bench machine (see page 153).
4. For PCB finishes other than tin, contact Tyco Electronics.
A
C
Localized
Gold Plate
Area
.100*
[2.54]
.042
[1.07]
.036±.002
[0.91±0.05]
Recommended
Plated Hole Size
for Tin Plated
Through Hole
PC Pad
Localized
B
Tin Plate
Area
.020
[0.51]
Typ.
.050
[1.27]
.100
[2.54]
Customer
Board
5
Material and Finish
Posts — Phosphor bronze, plated as
follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000100-
.000200 [0.00254-0.00508] tin on solder
area, with entire post underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000100-
.000200 [0.00254-0.00508] tin on solder
area, with entire post underplated .000050
[0.00127] nickel
Plating C — .000030 [0.00076] gold over
.000050 [0.00127] nickel on entire post
Plating D — .000100-.000200 [0.00254-
0.00508] tin over .000050 [0.00127] nickel
on entire post
A
.210 [5.33]
.278 [7.06]
.278 [7.06]
.278 [7.06]
.318 [8.08]
Dimensions
B
.227 [5.77]
.165 [4.19]
.284 [7.21]
.738 [18.75]
.165 [4.19]
C
.437 [11.10]
.443 [11.25]
.562 [14.27]
1.016 [25.81]
.483 [14.27]
Plating A
—
5-87623-1
—
—
—
Post Plating/Part Nos.
Plating B Plating C Plating D
— 1-87878-6 1-87022-4
5-87623-4 1-87022-1 1-87022-0
— 1-87022-3
—
— 1-87022-2 1-87022-4
— 4-87022-1 4-87022-3
Post/Tab
Insertion Head
—
904507-1
—
—
—
Notes: 1. Approximate Posts per reel—20,000.
*Point of measurement for plating thickness.
2. Other post lengths are available, consult Tyco Electronics.
3. The Post/Tab Insertion Head can be used on the Comp-U-Sertor II machine or the Modular Insertion
System Bench machine (see page 153).
4. For PCB finishes other than tin, contact Tyco Electronics.
Note: All part numbers are RoHS compliant.
163
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208