5-103169-3 Datasheet, PDF (86/96 Pages) Tyco Electronics – AMPMODU Headers and Receptacles, .100 [2.54] Centerline

AMPMODU Interconnection System
Mod II Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centerlines
Closed Entry, End Stackable,
Short Point-of-Contact,
.320
with Standoffs
[8.13]
A
5
.050
[1.27]
(2 Plc.)
.174
[4.42]
Max.
(Point-of-Contact)
.100
B
[2.54]
Typ.
.100
[2.54]
Post
Entry
.238
[6.05]
.118
[3.00]
(Localized Gold
Plate Area)
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze,
plated as follows:
Plating A — Duplex .000030 [0.00076]
gold on contact area, .000150-.000300
[0.00381-0.00762] matte tin on solder
area all over .000050 [0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
Related Product Data
Mateable Headers —
Refer to the Mating Post Selection
Guide — page 90
Performance Characteristics —
page 168
Technical Documents — page 276
Product Specification
108-25026
Application Specification
114-25018
Additional receptacle assembly
sizes are available; minimum order
quantities may apply. Consult
Tyco Electronics.
12
Pos. Ref.
PC Board
(Ref.)
.069
[1.75]
B
.100*
[2.54]
Typ.
.115
[2.92]
.125
.310
[3.18]
(Localized Gold
CL
[7.87]
CL
Plate Area)
.060^+-..000050
[ ] ^{.10.6502+-.00.0103}
.310
[7.87]
.035^±.003 Dia.
[0.89^±0.08] Typ.
Recommended PC Board Hole Layout
(for .062 [1.57] thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
No. of
Pos.
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
50
60
Dimensions
A
B
.200 [5.08]
.100 [2.54]
.300 [7.62]
.200 [5.08]
.400 [10.16]
.300 [7.62]
.500 [12.70]
.400 [10.16]
.600 [15.24]
.500 [12.70]
.700 [17.78]
.600 [15.24]
.800 [20.32]
.700 [17.78]
.900 [22.86]
.800 [20.32]
1.000 [25.40]
.900 [22.86]
1.100 [27.94]
1.000 [25.40]
1.200 [30.48]
1.100 [27.94]
1.300 [33.02]
1.200 [30.48]
1.400 [35.56]
1.300 [33.02]
1.500 [38.10]
1.400 [35.56]
1.600 [40.64]
1.500 [38.10]
1.700 [43.18]
1.600 [40.64]
1.800 [45.72]
1.700 [43.18]
1.900 [48.26]
1.800 [45.72]
2.000 [50.80]
1.900 [48.26]
2.500 [63.50]
2.400 [60.96]
3.000 [76.20]
2.900 [73.66]
Contact Plating/Part Nos.
Plating A
Plating B
Plating C
6-5535512-1
5146140-1
6-5102084-4
6-5535512-2
5146140-2
6-5102084-3
6-5535512-3
5146140-3
6-5102084-2
6-5535512-4
5146140-4
6-5102084-1
5535512-1
5146140-5
6-5102084-0
1-5535512-7
5146140-6
5-5102084-9
1-5535512-8
5146140-7
5-5102084-8
1-5535512-6
5146140-8
5-5102084-7
5535512-2
5146140-9
5-5102084-6
1-5535512-9
1-5146140-0
5-5102084-5
5535512-3
1-5146140-1
5-5102084-4
2-5535512-0
1-5146140-2
5-5102084-3
2-5535512-1
1-5146140-3
5-5102084-2
2-5535512-2
1-5146140-4
5-5102084-1
2-5535512-3
1-5146140-5
5-5102084-0
5535512-4
1-5146140-6
4-5102084-9
5535512-5
1-5146140-7
4-5102084-8
2-5535512-4
1-5146140-8
4-5102084-7
2-5535512-5
1-5146140-9
4-5102084-6
5535512-7
2-5146140-0
4-5102084-1
3-5535512-0
2-5146140-1
3-5102084-6
Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle assemblies.
2. .256 [6.50] minimum positive pin stop to prevent shorting between row.
170
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Note: All part numbers are RoHS compliant.
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208