5-103169-3 Datasheet, PDF (5/96 Pages) Tyco Electronics – AMPMODU Headers and Receptacles, .100 [2.54] Centerline

AMPMODU Interconnection System
Board-to-Board Solutions Guide, .100 [2.54] Centerline Products
Problem or Concern
Headers Float Off Board
Soldering Operation
Header Contacts Damaged
During Manufacturing
Operation or In-Field Use
Board/Backplane Requires
High Temperature Surface-
Mount Compatibility
Application Requires Board
Guidance, Polarization and/or
Blind-Mate Capability
Reduction in Parallel
Board-to-Board Stack Height
Necessary (Refer to Parallel
Stack Guide on Page 62.)
Soldering Problems with
Thru-Hole Bottom Entry
Receptacles (Must Mask
Post Holes in Board During
Soldering Operation)
Application Requires
Connectors to be End-to-End
Stackable on .100 [2.54] Grid
Tyco Electronics'
Potential Solution
Single-Row
Vertical Headers
and Receptacles
(Page Ref.)
HEADERS Retention Feature:
Unshrouded
102
Shrouded
—
Shrouded HEADERS:
Standard Profile
115
Press-Fit ACTION PIN POST
HEADERS:
Unshrouded
146
Shrouded
—
Machine Applied
Posts
163, 164
Surface-Mount Compatible Thru-Hole:
HEADERS:
Unshrouded
102*
Shrouded
—
(Low Profile)
RECEPTACLES
—
Surface-Mount:
HEADERS
RECEPTACLES
109*
187, 188
Two-Piece Family: w/Guide Posts:
HEADERS
—
RECEPTACLES
—
Mod IV Low Profile
RECEPTACLES:
TOP ENTRY:
Thru-Hole
Surface-Mount
BOTTOM ENTRY:
Thru-Hole
Surface-Mount
DUAL ENTRY
Thru-Hole
Surface Mount
178
—
177
—
181
187, 188
RECEPTACLES:
Bottom Entry
Outrigger
(Separate Holes for
181
Receptacle Leads
and Mating Leads)
End-to-End Stackable:
HEADERS (Unshrouded):
Thru-Hole
93, 102
Thru-Hole*
102*
Surface-Mount
109*
RECEPTACLES:
Thru-Hole
175, 177, 178, 181
Surface Mount
188
*High temperature compatible version, refer to page ref. listed.
Single-Row
Right-Angle Headers,
Horizontal Receptacles
(Page Ref.)
103
—
116
Double-Row
Vertical Headers
and Receptacles
(Page Ref.)
198
104, 199
117-121
Double-Row
Right-Angle Headers,
Horizontal Receptacles
(Page Ref.)
199
105, 200
122-128
—
147
—
—
148, 149, 199
—
103*
—
—
—
172
—
—
—
—
—
—
—
—
—
104*
130,* 137*
196*
110
189-192
198, 199
196*
179, 180*
—
—
—
182-184
189-192
182
105*
138*
195*
—
173
200
195*
—
—
—
—
—
—
—
94, 95, 103*
103*
—
169*
172
96, 97, 104*
104*
110*
176, 179, 180*, 182*, 183, 184
191, 192
98. 99. 105
108*
—
170
173
Wire-to-Board Solutions Guide, .100 [2.54] Centerline Products
5
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Customer Requirement
Application Requires
Guidance, Polarization
Wire-to-Wire Application
Wire-to-Wire Application (Latched)
Wire-to-Wire Application (Through Panel)
High Vibration and Shock Applications
Printed Circuit Board Polarization
Board Requires Surface Mount Capability
Need to mate to
AMP-LATCH Eject Headers
Need to Minimize Strain to Cable
Application Requires
Self-Retaining Contacts
Header Secured to Board
During/Prior to Soldering
Mate to Unshrouded Header
with Retention Requirements
Multiple Cables to be
Common to One Header
Right-Angle Cable Dress
Application Requires Crimp
Contacts and MTE Housings
Housings and End-to-End and
Side-to-Side Stackable
Connector Must Mate to
Post Lengths of .169 [4.29] Min.
Tyco Electronics' Potential Solution
Mod IV Polarized Housing
MTE Latched Receptacle and Header
MT with Polarizing Covers
Short Point Polarized Housing
Mod IV Receptacle Contacts and Pins
MTE Latched Receptacle and Shrouded Pin Assembly
MTE Panel Mount
Locking Clip Contacts and Housings
MTE Header with PC Board Orientation Peg
MTE Surface Mount Headers
MTE High Temperature Compatible Headers
Mod IV Ejection Housing
MT with Eject Covers
Mod IV Housing with Strain Relief
Locking Clip Contacts
MTE Headers with Post Retention or Holddowns
Mod IV plain Housing with Mod V Contacts
MTE with High Pressure Contacts
MTE Coupling Shroud, Double- or Single-Row
MT with Hermaphroditic Covers
Short Point Contacts
Short Point Double-Row Housing,
MTE Plain Housing
Short Point Contacts
Catalog Page(s)
220
230, 231, 244-250
256-258
224
211-213
230, 231, 236, 237
242
207-209
248, 249
251, 252
249, 250
220
256-259
218, 219
207, 298
244-250
213, 214, 216
234, 235
240, 241
229, 256, 257, 259
222
223, 228, 229
222
89
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208