1032E Datasheet, PDF (6/16 Pages) Lattice Semiconductor – In-System Programmable High Density PLD

Specifications ispLSI 1032E
External Timing Parameters
Over Recommended Operating Conditions
PARAMETER ^{TEST 4} #²
COND.
DESCRIPTION¹
-90
-80
-70
UNITS
MIN. MAX. MIN. MAX. MIN. MAX.
tpd1
A
tpd2
A
fmax (Int.) A
fmax (Ext.) –
fmax (Tog.) –
tsu1
–
tco1
A
th1
–
tsu2
–
tco2
–
th2
–
tr1
A
trw1
–
1
2
3
4
5
6
7
8
Data Propagation Delay, 4PT Bypass, ORP Bypass – 10.0 – 12.0 – 15.0
Data Propagation Delay, Worst Case Path
– 12.5 – 15.0 – 17.5
S _{Clock Frequency with Internal Feedback 3}
90.0 – 80.0 – 70.0 –
N _Clock
Frequency
with
External
Feedback
(
1
tsu2 +
) _tco1
69.0
– 61.0
–
56.0
–
IG ^Clock
Frequency,
Max.
Toggle
(
1
twh +
) _tw1
125 – 111 – 100 –
GLB Reg. Setup Time before Clock,4 PT Bypass 7.5 – 8.5 – 9.0 –
S _{GLB Reg. Clock to Output Delay, ORP Bypass}
– 6.0 – 6.5 – 7.0
DE ^{GLB Reg. Hold Time after Clock, 4 PT Bypass}
0.0 – 0.0 – 0.0 –
ns
ns
MHz
MHz
MHz
ns
ns
ns
9 GLB Reg. Setup Time before Clock
8.5 – 10.0 – 11.0 –
ns
10 GLB Reg. Clock to Output Delay
11 GLB Reg. Hold Time after Clock
12 Ext. Reset Pin to Output Delay
13 Ext. Reset Pulse Duration
– 7.0 –
W _{0.0 – 0.0}
E_{– 13.5 –}
N^{6.5 – 8.0}
7.5
–
14.0
–
– 8.0
0.0 –
– 15.0
10.0 –
ns
ns
ns
ns
tptoeen
tptoedis
tgoeen
tgoedis
B 14 Input to Output Enable
C 15 Input to Output Disable
B 16 Global OE Output Enable
C 17 Global OE Output Disable
–
R_–
O^–
F^–
15.0
15.0
9.0
9.0
–
–
–
–
16.5
16.5
10.0
10.0
– 18.0
– 18.0
– 12.0
– 12.0
ns
ns
ns
ns
twh
– 18 External Synchronous Clock Pulse Duration, High 4.0 – 4.5
A _twl
– 19 External Synchronous Clock Pulse Duration, Low 4.0 – 4.5
E tsu3
– 20 I/O Reg. Setup Time before Ext. Sync Clock (Y2, Y3) 3.5 – 3.5
2 _th3
– 21 I/O Reg. Hold Time after Ext. Sync. Clock (Y2, Y3) 0.0 – 0.0
3 _{1. Unless noted otherwise, all parameters use the GRP, 20 PTXOR path, ORP and Y0 clock.}
0 _{2. Refer to Timing Model in this data sheet for further details.}
1 ^{3. Standard 16-bit counter using GRP feedback.}
ispLSI ^{4. Reference Switching Test Conditions section.}
–
–
–
–
5.0 –
ns
5.0 –
ns
4.0 –
ns
0.0 –
ns
Table 2-0030B/1032E
USE
6