|
PALCE16V8 Datasheet, PDF (22/32 Pages) Advanced Micro Devices – EE CMOS 20-Pin Universal Programmable Array Logic | |||
|
◁ |
CAPACITANCE1
Parameter
Symbol
Parameter Description
Test Conditions
Typ Unit
CIN
Input Capacitance
COUT
Output Capacitance
VIN = 2.0 V
VOUT = 2.0 V
VCC = 5.0 V, TA = 25 °C,
f = 1 MHz
5
pF
8
pF
Note:
1. These parameters are not 100% tested, but are evaluated at initial characterization and at any time the design is modiï¬ed where
capacitance may be affected.
SWITCHING CHARACTERISTICS OVER INDUSTRIAL OPERATING RANGES1
Parameter
Symbol
Parameter Description
tPD
Input or Feedback to Combinatorial Output
-15
R Min 2
Max
FO 15
Unit
ns
tS
Setup Time from Input or Feedback to Clock
S tH
Hold Time
E tCO
Clock to Output
IC S tWL
LOW
N Clock Width
tWH
HIGH
EV IG Maximum
External Feedback
D S fMAX
Frequency (Notes 3 Internal Feedback (fCNT)
E and 4)
No Feedback
L D tPZX
OE to Output Enable
A tPXZ
OE to Output Disable
G W tEA
Input to Output Enable Using Product Term Control
E E tER
Input to Output Disable Using Product Term Control
S N Notes:
U 1. See âSwitching Test Circuitâ for test conditions.
1/(tS+tCO)
1/(tS+tCF)
1/(tWH+tWL)
10
ns
0
ns
10
ns
8
ns
8
ns
50
MHz
58.8
MHz
62.5
MHz
15
ns
15
ns
15
ns
15
ns
2. This parameter is tested in standby mode.
3. These parameters are not 100% tested, but are calculated at initial characterization and at any time the design is modiï¬ed where
frequency may be affected.
4. tCF is a calculated value and is not guaranteed. tCF can be found using the following equation:
tCF = 1/fMAX (internal feedback) â tS.
22
PALCE16V8Z-15 (Ind)
|
▷ |