PALCE16V8 Datasheet, PDF (15/32 Pages) Advanced Micro Devices – EE CMOS 20-Pin Universal Programmable Array Logic

ABSOLUTE MAXIMUM RATINGS
OPERATING RANGES
Storage Temperature . . . . . . . . . . . . . .-65°C to +150°C _{Commercial (C) Devices}
Ambient Temperature
with Power Applied . . . . . . . . . . . . . .-55°C to +125°C
Supply Voltage
with Respect to Ground . . . . . . . . . . -0.5 V to +7.0 V
DC Input Voltage . . . . . . . . . . . -0.5 V to V_CC + 0.5 V
DC Output or I/O
Pin Voltage . . . . . . . . . . . . . . . . . -0.5 V to V_CC + 0.5 V
Static Discharge Voltage . . . . . . . . . . . . . . . . . 2001 V
Ambient Temperature (T_A)
Operating in Free Air . . . . . . . . . . . . . . . 0°C to +75°C
Supply Voltage (V_CC)
with Respect to Ground . . . . . . . . . +4.75 V to +5.25 V
Operating ranges define those limits between which the func-
tionality of the device is guaranteed.
Latchup Current (T_A = 0°C to 75°C) . . . . . . . . . 100 mA
Stresses above those listed under Absolute Maximum Ratings
may cause permanent device failure. Functionality at or above
these limits is not implied. Exposure to Absolute Maximum Rat-
ings for extended periods may affect device reliability. Pro-
FOR
gramming conditions may differ.
ES DC CHARACTERISTICS OVER COMMERCIAL OPERATING RANGES
IC ^{S Parameter}
N _Symbol
Parameter Description
Test Description
Min
EV ^{IG VOH}
Output HIGH Voltage
D ^{S VOL}
Output LOW Voltage
E _VIH
Input HIGH Voltage
I_OH = -3.2 mA, V_IN = V_IH or V_IL, V_CC = Min
2.4
I_OL = 24 mA, V_IN = V_IH or V_IL, V_CC = Min
Guaranteed Input Logical HIGH
Voltage for all Inputs (Note 1)
2.0
AL ^D _VIL
Input LOW Voltage
Guaranteed Input Logical LOW
Voltage for all Inputs (Note 1)
G ^W _IIH
Input HIGH Leakage Current
E ^E I_IL
Input LOW Leakage Current
US ^{N IOZH}
Off-State Output Leakage Current HIGH
V_IN = 5.25 V, V_CC = Max (Note 2)
V_IN = 0 V, V_CC = Max (Note 2)
V_OUT = 5.25 V, V_CC = Max
V_IN = V_IH or V_IL (Note 2)
Max
0.5
0.8
10
–100
10
Unit
V
V
V
V
µA
µA
µA
I_OZL
Off-State Output Leakage Current LOW
V_OUT = 0 V, V_CC = Max
V_IN = V_IH or V_IL (Note 2)
–100
µA
I_SC
Output Short-Circuit Current
V_OUT = 0.5 V, V_CC = Max (Note 3)
–30 –150 mA
I_CC
Supply Current (Dynamic)
Outputs Open (I_OUT = 0 mA),
V_CC = Max, f = 15 MHz
55
mA
Notes:
1. These are absolute values with respect to device ground, and all overshoots due to system or tester noise are included.
2. I/O pin leakage is the worst case of I_IL and I_OZL (or I_IH and I_OZH).
3. Not more than one output should be shorted at a time, and the duration of the short-circuit should not exceed one second.
V_OUT = 0.5 V has been chosen to avoid test problems caused by tester ground degradation.
PALCE16V8Q-10 (Com’l)
15