PALCE16V8 Datasheet, PDF (16/32 Pages) Advanced Micro Devices – EE CMOS 20-Pin Universal Programmable Array Logic

CAPACITANCE¹
Parameter
Symbol
Parameter Description
Test Conditions
Typ Unit
C_IN
Input Capacitance
C_OUT
Output Capacitance
V_IN = 2.0 V
V_OUT = 2.0 V
V_CC = 5.0 V, T_A = 25 °C,
f = 1 MHz
5
pF
8
pF
Note:
1. These parameters are not 100% tested, but are evaluated at initial characterization and at any time the design is modified where
capacitance may be affected.
SWITCHING CHARACTERISTICS OVER COMMERCIAL OPERATING RANGES¹
Parameter
Symbol
Parameter Description
t_PD
Input or Feedback to Combinatorial Output
-10
R _Min 2 _Max
FO ³
10
Unit
ns
t_S
Setup Time from Input or Feedback to Clock
S ^tH
Hold Time
E ^tCO
Clock to Output
IC ^{S tWL}
LOW
N ^{Clock Width}
t_WH
HIGH
EV ^{IG External Feedback}
D ^{S fMAX}
Maximum Frequency
(Note 3)
Internal Feedback (f_CNT)
E No Feedback
L _{D tPZX}
OE to Output Enable
A _tPXZ
OE to Output Disable
G ^W _tEA
Input to Output Enable Using Product Term Control
E ^{E t}ER
Input to Output Disable Using Product Term Control
S ^N _Notes:
U ^{1. See “Switching Test Circuit” for test conditions.}
1/(t_S+t_CO)
1/(t_S+t_CF) (Note 4)
1/(t_WH+t_WL)
7.5
ns
0
ns
3
7.5
ns
6
ns
6
ns
66.7
MHz
71.4
MHz
83.3
MHz
2
10
ns
2
10
ns
3
10
ns
3
10
ns
2. Output delay minimums for t_PD, t_CO, t_PZX, t_PXZ, t_EA, and t_ER are defined under best case conditions. Future process improvements
may alter these values; therefore, minimum values are recommended for simulation purposes only.
3. These parameters are not 100% tested, but are calculated at initial characterization and at any time the design is modified where
frequency may be affected.
4. t_CF is a calculated value and is not guaranteed. t_CF can be found using the following equation:
t_CF = 1/f_MAX (internal feedback) – t_S.
16
PALCE16V8Q-10 (Com’l)