V-SERIES Datasheet, PDF (42/45 Pages) Keysight Technologies – Infiniium V-Series Oscilloscopes

42 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Infiniium V-Series Performance Characteristics (Continued)
Display, computer system, I/O ports, and file types (Continued)
I/O ports
Ethernet (LAN)
USB
External display
GPIB
Oscilloscope ports
Auxiliary out
Calibration out
Trigger out
Time base reference output
Time base external reference input
(impedance into 50 Ω)
Auxiliary trigger in
Digital channels connector ¹
Pattern generator ²
Reference clock in ²
Recovered clock out ²
File types
Analog waveform
Digital waveform
Images
RJ-45 connector, supports 10BASE-T, 100BASE-T, and 1000BASE-T. Enables Web-enabled remote
control, email on trigger, data/file transfers, and network printing
8 total ports
–– Front panel: Two USB 3.0 host ports and one USB 2.0 host port
–– Back panel: Two USB 3.0 host ports, one USB 3.0 device port and two USB 2.0 ports
–– USB 3.0 port supports up to 200 MB/s data offload
Two ports: One DisplayPort and one VGA video out
Drivers support up to two simultaneous displays
IEEE-488 digital communication bus for instrument control
100 MHz, square wave, PRBS 2⁷-1, PRBS 2¹⁵-1, PRBS 2²³-1, and PRBS 2³¹-1
DC (± 2.4 V), 100 MHz, square wave, PRBS 2⁷-1, PRBS 2¹⁵-1, PRBS 2²³-1, and PRBS 2³¹-1
Peak-to-peak amplitude into 50 Ω: 2.4 V, offset: 0 V
Peak-to-peak amplitude into 50 Ω: 750 mV, offset: 0 V when derived from the internal reference
Signal amplitude follows reference input when derived from external reference
Amplitude: 178 mV peak to 1 V peak
Frequency: 10 MHz ± 5 ppm high-quality sine wave or square wave
External trigger input
Digital channel inputs
Demo pattern output from the hardware serial trigger
Peak-to-peak amplitude into 50 Ω: 400 mV, offset: 400 mV
External clock reference input to the hardware serial trigger
Peak-to-peak amplitude: 0.8 V to 3.6 V. Voltage range: —0.1 V to 3.7 V
Clock rise and fall time (10 to 90%): 1 ns or faster
Sub-rate clock output generated by the hardware serial trigger
Peak-to-peak amplitude into 50 Ω: 1 V, offset: 0 V
Compressed internal format (*.wfm (200 Mpts))
Comma-separated values (*.csv (2 Gpts))
Tab separated values (*.tsv (2 Gpts))
Public binary format (*.bin (500 Mpts))
Y value file (*.txt (2 Gpts))
Hierarchical data file (*.h5 (2 Gpts))
Composite setup and data file (*.osc (2 Gpts))
Hierarchical data file (*.h5 (2 Gpts)) composite setup and data file (*.osc (2 Gpts))
BMP, PNG, TIFF, GIF, or JPEG
1.  MSO models only.
2.  Models with hardware serial trigger option.