V-SERIES Datasheet, PDF (11/45 Pages) Keysight Technologies – Infiniium V-Series Oscilloscopes

11 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Industry’s Most Advanced and Flexible 30-GHz Probing System
To take advantage of your investment in a high-bandwidth oscilloscope, you must have a probing system that can deliver high
performance measurements. InfiniiMax III and III+ probing systems provide up to 30 GHz of bandwidth, delivering unrivaled
performance and real-world usability. The InfiniiMode feature allows convenient measurement of differential, single-ended and
common mode signals with a single probe tip – without reconnecting the probe from its connection point.
The InfiniiMax III and III+ 30-GHz probing system includes accessories to enable probing with a ZIF tip, browsing or connecting to 2.92 mm/3.5 mm/
SMA inputs.
Industry’s only fully-integrated probe amplifier with unique S-parameter correction
Each individual InfiniiMax III and III+ probe amplifier stores its unique S-parameters and is automatically downloaded to the
oscilloscope when connected for probe response correction. The S-parameters of the various probe heads are also applied to further
flatten the probe’s magnitude and phase response for better measurement accuracy. Traditionally, probe correction uses a nominal
model based on a typical probe amplifier instead of the specific amplifier. Generally, the biggest variations between probing systems
are a result of the probe amplifier. The ability to correct a specific probe amplifier’s response results in a more accurate probe
correction, which yields a more accurate measurement.
Industry’s only upgradable probes
Purchase the probing performance you need today with
confidence that you can expand your performance in the future
with InfiniiMax III bandwidth-upgradable probes. Upgrade to
higher performance at a fraction of the cost.
The InfiniiMax III and III+ probing system uses the same InP technology
that enables high-bandwidth and low-noise oscilloscope measurements.