V-SERIES Datasheet, PDF (20/45 Pages) Keysight Technologies – Infiniium V-Series Oscilloscopes

20 | Keysight | Infiniium V-Series Oscilloscopes - Data Sheet
Industry’s Most Comprehensive Software (Continued)
Compliance applications with deep standard
technical expertise
Today’s demanding environment means you have less time to
understand the details of the technologies you are testing.
You also have less time to develop test automation software to
increase measurement throughput and decrease time to market.
Keysight’s compliance applications and expertise save you time
and resources with measurement automation. Compliance
applications are certified to test to the exact specifications of
each technology standard. If a test passes on the V-Series in
your lab, you can be assured that it will pass in test labs and
plugfests worldwide. Keysight experts are on multiple technology
boards and industry standards committees, and they help to
define compliance requirements.
Setup wizards combined with intelligent test filtering give you
confidence that you are running the right tests. Comprehensive
HTML reports with visual documentation and pass/fail results
guarantee that critical information is retained. Check the
V-Series ordering configuration for supported standards.
DDR4 and LPDDR4 compliance application providing full electrical and
timing characterization based on JEDEC specification.
Test customization and switch automation
The N5467B user-defined application’s add-in provides you with
the ability to add additional tests, instrument control and device
control into the existing compliance applications. The compliance
applications can be controlled via the remote programming
interface (standard feature) for test automation.
Compliance applications on the V-Series support a switch
matrix, making testing simpler by automating test for each lane
of a multi-lane bus. Typical testing requires reconnecting the
oscilloscope each time you switch a lane, which increases test
time and possible inaccuracies. The V-Series solves this problem
by supporting a switch matrix through its compliance test.
Simply connect the switch to the oscilloscope and all the lanes,
and then press run to complete full testing of your entire device.
The compliance application fully supports PrecisionProbe and
InfiniiSim software, giving you the ability to characterize and
normalize every switch path to the device under test.
Test automation for multilane interface testing with no compromise
on accuracy, which reduces test time and effort. An Infiniium 90000
X-Series oscilloscope is shown above.