HMP8117_07 Datasheet, PDF (42/45 Pages) Intersil Corporation – NTSC/PAL Video Decoder

HMP8117
Absolute Maximum Ratings
Digital Supply Voltage (V_CC to GND) . . . . . . . . . . . . . . . . . . . . 7.0V
Analog Supply Voltage (VAA to GND) . . . . . . . . . . . . . . . . . . . 7.0V
Digital Input Voltages . . . . . . . . . . . . . . . GND - 0.5V to V_CC + 0.5V
ESD Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 1
Operating Temperature Range
HMP8117CN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to +70°C
Thermal Information
Thermal Resistance (Typical, See Note 41)
θ_JA (°C/W)
MQFP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . .
46
Maximum Power Dissipation
HMP8117CN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.78W
Maximum Storage Temperature Range . . . . . . . . . .-65°C to +150°C
Maximum Junction Temperatures . . . . . . . . . . . . . . . . . . . . . +150°C
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . +300°C
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTE:
41. θ_JA is measured with the component mounted on an evaluation PC board in free air. Dissipation rating assumes device is mounted with all leads
soldered to printed circuit board.
Electrical Specifications V_CC = V_AA = 5.0V, T_A = +25°C
PARAMETER
SYMBOL
TEST CONDITION
POWER SUPPLY CHARACTERISTICS
Power Supply Voltage Range
V_CC, V_AA
(Note 42)
Total Power Supply Current
Digital Power Supply Current
Analog Power Supply Current
I_TOT
I_CC
I_AA
CLK2 = 29.5MHz,
V_CC = VAA = 5.25V
Outputs Not Loaded
Total Power Dissipation
P_TOT
DC CHARACTERISTICS: DIGITAL I/O (EXCEPT CLK2 and I²C INTERFACE)
Input Logic High Voltage
Input Logic Low Voltage
Output Logic High Voltage
Output Logic Low Voltage
Input Leakage Current
V_IH
V_IL
V_OH
V_OL
I_IH, I_IL
V_CC = Max
V_CC = Min
I_OH = -4mA, V_CC = Max
I_OL = 4mA, V_CC = Min
V_CC = Max,
Input = 0V or 5V
Input/Output Capacitance
Three-State Output Current
Leakage
C_IN, C_OUT
I_OZ
f = 1MHz (Note 42)
All Measurements Referenced to
Ground, T_A = +25°C
DC CHARACTERISTICS: CLK2 DIGITAL INPUT
Input Logic High Voltage
V_IH
Input Logic Low Voltage
V_IL
Input Leakage Current
I_IH
I_IL
Input Capacitance
C_IN
DC CHARACTERISTICS: I²C INTERFACE
V_CC = Max
V_CC = Min
V_CC = Max
Input = 0V or V_CC
CLK2 = 1MHz (Note 42)
All Measurements Referenced to
Ground, T_A = +25°C
Input Logic High Voltage
Input Logic Low Voltage
Output Logic High Voltage
Output Logic Low Voltage
V_IH
V_IL
V_OH
V_OL
V_CC = Max
V_CC = Min
I_OH = -1mA, V_CC = Max
I_OL = 3mA, V_CC = Min
MIN
TYP
MAX UNITS
4.75
5
5.25
V
279
305
mA
132
mA
147
mA
1.46
1.60
W
2.0
V
0.8
V
2.4
V
-
0.4
V
-10
± 10
μA
8
-
pF
-10
10
μA
0.7xV_CC
-10
V
0.3xV_CC
V
10
μA
-450
μA
-
8
-
pF
0.7xV_CC
3.0
0
V
0.3xV_CC
V
V
0.4
V
42
FN4643.3
April 19, 2007