English
Language : 

ISL6308A Datasheet, PDF (27/28 Pages) Intersil Corporation – Three-Phase Buck PWM Controller with High Current Integrated MOSFET Drivers
ISL6308A
+5V
CHF0
ROFST
RFS
RREF
CREF
+12V
R1
VDIFF
VSEN
RGND
C1
FB
LOCATE CLOSE TO IC
C2
(MINIMIZE CONNECTION PATH)
R2
COMP
PVCC1
BOOT1
UGATE1
CHF01
CBOOT1
+12V
CHF1
KEY
HEAVY TRACE ON CIRCUIT PLANE LAYER
ISLAND ON POWER PLANE LAYER
ISLAND ON CIRCUIT PLANE LAYER
VIA CONNECTION TO GROUND PLANE
CBIN1
LOCATE NEAR SWITCHING TRANSISTORS;
(MINIMIZE CONNECTION PATH)
3PH
2PH
VCC
PHASE1
ISEN1
LGATE1
RISEN1
LOUT1
OFST
FS
DAC
REF
REF1
REF0
OVP
PGOOD
GND
ISL6308A
PVCC2
CHF02
BOOT2
UGATE2
CBOOT2
+12V
CHF2
CBIN2
PHASE2
ISEN2
LGATE2
RISEN2
LOUT2
CBOUT (CHFOUT)
LOAD
PVCC3
BOOT3
UGATE3
CHF03
CBOOT3
+12V
CBIN3
CHF3
LOCATE NEAR LOAD;
(MINIMIZE CONNECTION PATH)
ENLL
IREF
DROOP
OCSET ICOMP
ISUM
RCOMP
ROCSET
CCOMP
PHASE3
ISEN3
LGATE3
CSUM
RISEN3
RS
RS
RS
LOUT3
FIGURE 27. PRINTED CIRCUIT BOARD POWER PLANES AND ISLANDS
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
27
FN6669.0
September 9, 2008