80C186EA Datasheet, PDF (9/50 Pages) Intel Corporation – 16-BIT HIGH-INTEGRATION EMBEDDED PROCESSORS

80C186EA 80C188EA 80L186EA 80L188EA
PACKAGE INFORMATION
This section describes the pins pinouts and thermal
characteristics for the 80C186EA in the Plastic
Leaded Chip Carrier (PLCC) package Shrink Quad
Flat Pack (SQFP) and Quad Flat Pack (QFP) pack-
age For complete package specifications and infor-
mation see the Intel Packaging Outlines and Dimen-
sions Guide (Order Number 231369)
With the extended temperature range operational
characteristics are guaranteed over a temperature
range corresponding to ^b40 C to ^a85 C ambient
Package types are identified by a two-letter prefix to
the part number The prefixes are listed in Table 1
Table 1 Prefix Identification
Prefix Note
Package
Type
Temperature
Range
TN
PLCC
Extended
TS
QFP (EIAJ) Extended
SB
1 SQFP
Extended Commercial
N
1 PLCC
Commercial
S
1 QFP (EIAJ) Commercial
NOTE
1 The 25 MHz version is only available in commercial tem-
perature range corresponding to 0 C to a70 C ambient
Pin Descriptions
Each pin or logical set of pins is described in Table
3 There are three columns for each entry in the Pin
Description Table
The Pin Name column contains a mnemonic that
describes the pin function Negation of the signal
name (for example RESIN) denotes a signal that is
active low
The Pin Type column contains two kinds of informa-
tion The first symbol indicates whether a pin is pow-
er (P) ground (G) input only (I) output only (O) or
input output (I O) Some pins have multiplexed
functions (for example A19 S6) Additional symbols
indicate additional characteristics for each pin Table
3 lists all the possible symbols for this column
The Input Type column indicates the type of input
(asynchronous or synchronous)
Asynchronous pins require that setup and hold times
be met only in order to guarantee recognition at a
particular clock edge Synchronous pins require that
setup and hold times be met to guarantee proper
operation For example missing the setup or hold
time for the SRDY pin (a synchronous input) will re-
sult in a system failure or lockup Input pins may also
be edge- or level-sensitive The possible character-
istics for input pins are S(E) S(L) A(E) and A(L)
The Output States column indicates the output
state as a function of the device operating mode
Output states are dependent upon the current activi-
ty of the processor There are four operational
states that are different from regular operation bus
hold reset Idle Mode and Powerdown Mode Ap-
propriate characteristics for these states are also in-
dicated in this column with the legend for all possi-
ble characteristics in Table 2
The Pin Description column contains a text de-
scription of each pin
As an example consider AD15 0 I O signifies the
pins are bidirectional S(L) signifies that the input
function is synchronous and level-sensitive H(Z)
signifies that as outputs the pins are high-imped-
ance upon acknowledgement of bus hold R(Z) sig-
nifies that the pins float during reset P(X) signifies
that the pins retain their states during Powerdown
Mode
9
9