300 Datasheet, PDF (82/95 Pages) DB Lectro Inc – SCREW TYPE SERIES

Thermal Specifications and Design Considerations
Table 30.
Table 31.
temperature. Transistor Model parameters (Table 31) have been added to support
thermal sensors that use the transistor equation method. The Transistor Model may
provide more accurate temperature measurements when the diode ideality factor is
closer to the maximum or minimum limits. This thermal "diode" is separate from the
Thermal Monitor's thermal sensor and cannot be used to predict the behavior of the
Thermal Monitor.
Thermal “Diode” Parameters using Diode Model
Symbol
Parameter
Min
Typ
Max Unit Notes
I_FW
Forward Bias Current
n
Diode Ideality Factor
R_T
Series Resistance
5
—
200
µA
1.000 1.009 1.050
-
2.79
4.52
6.24
Ω
1
2, 3, 4
2, 3, 5
NOTES:
1.
Intel does not support or recommend operation of the thermal diode under reverse bias.
2.
Characterized across a temperature range of 50 - 80 °C.
3.
Not 100% tested. Specified by design characterization.
4.
The ideality factor, n, represents the deviation from ideal diode behavior as exemplified by
the diode equation:
I_FW = I_S * (e ^qVD^/nkT –1)
where I_S = saturation current, q = electronic charge, V_D = voltage across the diode, k = Boltzmann Constant,
and T = absolute temperature (Kelvin).
5.
The series resistance, R_T, is provided to allow for a more accurate measurement of the
junction temperature. R_T, as defined, includes the lands of the processor but does not
include any socket resistance or board trace resistance between the socket and the
external remote diode thermal sensor. RT can be used by remote diode thermal sensors
with automatic series resistance cancellation to calibrate out this error term. Another
application is that a temperature offset can be manually calculated and programmed into
an offset register in the remote diode thermal sensors as exemplified by the equation:
T_error = [R_T * (N-1) * I_FWmin] / [nk/q * ln N]
where T_error = sensor temperature error, N = sensor current ratio, k = Boltzmann Constant, q = electronic
charge.
Thermal “Diode” Parameters using Transistor Model
Symbol
Parameter
Min
Typ
Max Unit Notes
I_FW
I_E
n_Q
Beta
R_T
Forward Bias Current
Emitter Current
Transistor Ideality
Series Resistance
5
—
200
µA
1, 2
5
—
200
µA
0.997 1.001 1.005
3, 4, 5
0.391
—
0.760
3, 4
2.79
4.52
6.24
Ω
3, 6
NOTES:
1.
Intel does not support or recommend operation of the thermal diode under reverse bias.
2.
Same as I_FW in Table 30
3.
Characterized across a temperature range of 50 – 80 °C.
4.
Not 100% tested. Specified by design characterization.
5.
The ideality factor, nQ, represents the deviation from ideal transistor model behavior as
exemplified by the equation for the collector current:
I_C = I_S * (e ^qVBE^/nQ^kT –1)
Where I_S = saturation current, q = electronic charge, V_BE = voltage across the transistor base emitter junction
(same nodes as VD), k = Boltzmann Constant, and T = absolute temperature (Kelvin).
6.
The series resistance, R_T, provided in the Diode Model Table (Table 30) can be used for
more accurate readings as needed.
82
Datasheet