300 Datasheet, PDF (27/95 Pages) DB Lectro Inc – SCREW TYPE SERIES

Electrical Specifications
5. 0.24 V is defined at 20% of nominal V_TT of 1.2 V.
6. The TAP signal group must meet the signal quality specifications.
7. The maximum output current is based on maximum current handling capability of the buffer and is
not specified into the test load.
8. Leakage to V_SS with land held at V_TT.
9. Leakage to V_TT with land held at 300 mV.
Table 13.
VTTPWRGD DC Specifications
Symbol
Parameter
V_IL
Input Low Voltage
V_IH
Input High Voltage
Min
—
0.9
Typ
—
—
Max
0.3
—
Unit
V
V
Table 14.
BSEL[2:0] and VID[5:0] DC Specifications
Symbol
Parameter
Max
Unit Notes^{1, 2}
R_ON (BSEL) Buffer On Resistance
120
Ω
-
R_ON (VID) Buffer On Resistance
120
Ω
-
I_OL
Max Land Current
I_LO
Output Leakage Current
2.4
mA
-
200
µA
3
V_TOL
Voltage Tolerance
V_TT(max)
V
-
NOTES:
1. Unless otherwise noted, all specifications in this table apply to all processor frequencies.
2. These parameters are not tested and are based on design simulations.
3. Leakage to V_SS with land held at 1.2 V.
Table 15.
BOOTSELECT DC Specifications
Symbol
Parameter
Min
Typ Max
Unit
V_IL
Input Low Voltage
—
—
0.24
V
V_IH
Input High Voltage 0.96
—
—
V
NOTES:
1. These parameters are not tested and are based on design simulations.
Notes
1
1
Datasheet
27