3XX Datasheet, PDF (28/82 Pages) Intel Corporation – Celeron D Processor

Electrical Specifications
Table 2-15. BSEL [1:0] and VID[5:0] DC Specifications
Symbol
Parameter
Max
Unit
R_on (BSEL) Buffer On Resistance
60
Ω
R_on (VID) Buffer On Resistance
60
Ω
I_OL
Max Pin Current
8
mA
I_LO
Output Leakage Current
200
µA
V_TOL
Voltage Tolerance
3.3 + 5% V
NOTES:
1. Unless otherwise noted, all specifications in this table apply to all processor frequencies.
2. These parameters are not tested and are based on design simulations.
3. Leakage to V_SS with pin held at 2.5 V.
Notes¹
2
2
3
Table 2-16. BOOTSELECT DC Specifications
Symbol
Parameter
Min
Typ
Max
Unit
V_IL
Input Low Voltage
—
— 0.2 * VCCVID V
V_IH
Input High Voltage
0.8 * VCCVID —
—
V
NOTES:
1. These parameters are not tested and are based on design simulations.
Notes¹
2.12 V_CC Overshoot Specification
The Celeron D processor can tolerate short transient overshoot events where V_CC exceeds the VID
voltage when transitioning from a high to low current load condition. This overshoot cannot exceed
VID + V_{OS_MAX} (V_{OS_MAX} is the maximum allowable overshoot voltage). The time duration of
the overshoot event must not exceed T_{OS_MAX} (T_{OS_MAX} is the maximum allowable time duration
above VID). These specifications apply to the processor die voltage as measured across the
VCC_SENSE and VSS_SENSE pins.
Table 2-17. V_CC Overshoot Specifications
Symbol
Parameter
Min
Typ
Max
Unit Figure
Notes
V_{OS_MAX}
Magnitude of V_CC overshoot
above VID
—
T_{OS_MAX}
Time duration of V_CC
overshoot above VID
—
—
0.050
V
2-3
—
25
µs
2-3
28
Datasheet