English
Language : 

3XX Datasheet, PDF (27/82 Pages) Intel Corporation – Celeron D Processor
Electrical Specifications
11. These specifications are different depending on whether the platform is forward compatible to the Celeron D pro-
cessor or if it is optimized for the Celeron D processor. A compatible platform is one that is designed for a previous
generation processor but has some level of compatibility with the Celeron D processor. An optimized platform is one
designed specifically for the Celeron D processor; however, it may have some level of compatibility with previous
generation processors.
.
Table 2-12. PWRGOOD and TAP Signal Group DC Specifications
Symbol
Parameter
Min
Max
Unit Notes1,2
VHYS
Input Hysteresis
200
350
mV
3
VT+
Input low to high threshold
voltage
0.5 * (VCC + VHYS_MIN) 0.5 * (VCC + VHYS_MAX) V
4
VT-
Input high to low threshold
voltage
0.5 * (VCC – VHYS_MAX) 0.5 * (VCC – VHYS_MIN)
V
4
VOH
Output High Voltage
N/A
IOL
Output Low Current
—
ILI
Input Leakage Current
—
ILO
Output Leakage Current
—
Ron
Buffer On Resistance
7
VCC
45
± 200
± 200
12
V
4
mA
5
µA
6
µA
7
Ω
8
NOTES:
1. Unless otherwise noted, all specifications in this table apply to all processor frequencies.
2. All outputs are open drain.
3. VHYS represents the amount of hysteresis, nominally centered about 0.5 * VCC for all TAP inputs.
4. The VCC referred to in these specifications refers to instantaneous VCC.
5. The maximum output current is based on maximum current handling capability of the buffer and is not specified into
the test load.
6. Leakage to VSS with pin held at VCC.
7. Leakage to VCC with Pin held at 300 mV.
8. These values work for compatible and optimized platforms. A compatible platform is one that is designed for a pre-
vious generation processor but has some level of compatibility with the Celeron D processor. An optimized platform
is one designed specifically for the Celeron D processor; however, it may have some level of compatibility with pre-
vious generation processors.
Table 2-13. VCCVID DC Specifications
Symbol
Parameter
VCCVID Voltage
VCCVIDLB Voltage
Min
Typ
Max Unit
1.14
1.2
1.26
V
1.14
1.2
1.26
V
Notes
Table 2-14. VIDPWRGD DC Specifications
Symbol
VIL
VIH
Parameter
Input Low Voltage
Input High Voltage
Min
Typ
Max Unit
—
—
0.3
V
0.9
—
—
V
Notes
Datasheet
27