82562V Datasheet, PDF (1/42 Pages) Intel Corporation – 10/100 Mbps Platform LAN Connect

Intel^® 82562V 10/100 Mbps
P latform LAN Connect
Product Features
Datasheet
n IEEE 802.3 10BASE-T/100BASE-TX
compliant physical layer interface
n IEEE 802.3u Auto-Negotiation support
n Digital Adaptive Equalization control
n Link status interrupt capability
n XOR tree mode support
n 3-port LED support (speed, link and
activity)
n 10BASE-T auto-polarity correction
n LAN Connect Interface
n PHY detects polarity, MDI-X, and cable
lengths. Auto MDI, MDIX crossover at all
speeds
n Diagnostic loopback mode
n 1:1 transmit transformer ratio support
n Low power (less than 300 mW in active
transmit mode)
n Reduced power in “unplugged mode” (less
than 50 mW)
n Automatic detection of “unplugged mode”
n 3.3 V device
n 81-pin Mold Cap package--10mm x 10mm
x 1.745mm; 0.635mm Ball, 1.0mm Pitch
Additional Features
n The 82562V PLC supports strapping options that enable the following operating modes:
— LED support for three logic configurations.
— LAN disable function using one pin.
— Increased transmit strength.
n The receive BER performance increases the margin for cable length.
n Return Loss performance is improved.
Revision 1.00
January 2006
317757-001