TC1728 Datasheet, PDF (87/130 Pages) Infineon Technologies AG – 32-Bit Single-Chip Microcontroller

TC1728
Electrical Parameters
Table 26 Power Supply Parameters
Parameter
Symbol
Values
Unit Note / Test Condition
Min Typ. Max.
.
Maximum power PD
−−
dissipation
CC
902 mW power pattern= max;
mode = all external
−−
744 mW power pattern= realistic
mode = all external
Maximum power PD
−−
dissipation
CC
2032 mW
power pattern= max;
mode = 5V only with ext. pass
device;
SAK-TC1728F-192F133HL
SAK-TC1728F-192F133HR
2006 mW
8)
power pattern= max;
mode = 5V only with ext. pass
device;
SAK-TC1728N-192F133HL
SAK-TC1728N-192F133HR
−−
1490 mW
power pattern= realistic
mode = 5V only with ext. pass
device;
SAK-TC1728F-192F133HL
SAK-TC1728F-192F133HR
−−
1464 mW
9)
power pattern= realistic
mode = 5V only with ext. pass
device;
SAK-TC1728N-192F133HL
SAK-TC1728N-192F133HR
1) Infineon Power Loop: CPU and PCP running, all peripherals active. The power consumption of each customer
application will most probably be lower than this value, but must be evaluated separately.
2) The I_DD decreases typically by 62mA if the f_CPU decreases by 50MHz, at constant T_j.
3) The I_DD decreases typically by 52mA if the f_CPU decreases by 50MHz, at constant T_j.
4) The I_DD decreases typically by 52mA if the f_CPU decreases by 50MHz, at constant T_j.
5) For operations including the D-Flash the required current is always lower than the current for non-DFlash
operations.
6) Relevant for the power supply dimensioning, not for thermal considerations.
7) In case of erase of Program Flash PF, internal flash array loading effects may generate transient current spikes
of up to 15 mA for maximum 5 ms per flash module.
8) Maximum power dissipation for f_CPU = 80 MHz and no external pass device is 1695mW.
9) Maximum power dissipation for f_CPU = 80 MHz and no external pass device is 1260 mW.
Data Sheet
5-41
V1.2, 2014-06