TC1728 Datasheet, PDF (68/130 Pages) Infineon Technologies AG – 32-Bit Single-Chip Microcontroller

TC1728
Electrical Parameters
Table 19 LVDS_Pads Parameters
Parameter
Symbol
Min.
Output voltage high, pad V_OH CC −
class F, LVDS mode
Output voltage low, pad V_OL CC 875
class F, LVDS mode
Output Offset Voltage
V_OS CC 1075
Values
Typ. Max.
−
1525
−
−
−
1325
Unit Note /
Test Condition
mV termination
100 Ω ± 1 %
mV termination
100 Ω ± 1 %
mV termination
100 Ω ± 1 %
Class S pad parameters are only valid for V_DDM = 4.75 V to 5.25 V.
Table 20 Standard_Pads Class_S
Parameter
Symbol
Min.
Values
Unit Note /
Typ. Max.
Test Condition
Input Hysteresis for
HYSS CC 0.3 −
−
V
class S pads¹⁾
Input leakage current I_OZS CC −300 −
Input voltage high
V_IHS CC −
−
Input voltage low
V_ILS CC 1.9
−
V_ILS Delta ²⁾
V_ILSD CC -50
−
300 nA
3.6 V
−
V
50
mV Maximum input
low state
treshold
variation over
1ms
(V_DDP = consta
nt)
1) Hysteresis is implemented to avoid metastable states and switching due to internal ground bounce. It can´t be
guaranteed that it suppresses switching due to external system noise.
2) V_ILSD is implemented to ensure J2716 specification. It can’t be guaranteed that it suppresses switching due to
external noise.
Data Sheet
5-22
V1.2, 2014-06