English
Language : 

TC1728 Datasheet, PDF (126/130 Pages) Infineon Technologies AG – 32-Bit Single-Chip Microcontroller
TC1728
Revision History
– Changed max value of t64-t65
– Added dTxdly, dRxdly
– Updated ERAY timing figure
• Flash32 parameters
– Updated tPRD, tPRP
– Changed min value of WSDF to 50ns x fLMB
– Updated footnote 3
• Package parameters
– Added RTHJCT, RTHJCB, RTHJCL for LQFP144
• Package outline
– Added package outline for LQFP176
Changes from V0.5 to V0.6
• Added max limit for VRST5 for 5.0V single supply
• Removed note above MLI Transmitter table
• Updated conditions for tFL and tRL for LVDS pad parameters
• Updated limits for RDSONW and RDSONM for Class A1 pads
• Updated limits for RDSONW and RDSONM and RDSON1+ for Class A1+ pads
• Updated limits for RDSONW and RDSONM and RDSON2 for Class A2 pads
• Updated limits for RDSONW and RDSONM for Class F pads
• Updated conditions for tRF and tFF for Class F pad parameters
• Added footnote 7 to ADC table
• Updated QCONVof ADC table
• Updated conditions to tL of PLL Sysclk
• Changed t19 of DAP from SR to CC
• Removed condition for V5
• Added FADC input circuit
• Updated max limit for VAGND0 and min limit for VAREF0
• tBWG and tBWR are added to ADC table
• Updated description of tCAL
• Added a placeholder for RAIN, RAIN7T, RAREF, tS, fADCI, EADNL, EAINL, EAGAIN, EAOFF, TUE
at a separate ADC table for VDDM=3.3V
• Added a placeholder for tAWAF, tAWAS to both ADC tables for VDDM=5V and VDDM=3.3V
• Added a placeholder for tFWAF, tFWAS to FADC table for VDDM=5V, VDDM=3.3V
• Removed limits of gain=8 for EFGRAD
• Added VFAREFI and VFAGNDI parameters
• Updated limit of tSF2 to min 120ns
• Typo in Note for IV5 at 80MHz is corrected.
• Updated max limit of ΣIIN.
• Added IIN.
• Added Pin Reliability in Overload subchapter.
• Removed sentence “Exposure to conditions within the maximum ratings will not
affect device reliability.” Replaced with the Pin Reliability in Overload subchapter.
Data Sheet
6-4
V1.2, 2014-06