TC1728 Datasheet, PDF (53/130 Pages) Infineon Technologies AG – 32-Bit Single-Chip Microcontroller

TC1728
Electrical Parameters
5.1.5 Operating Conditions
The following operating conditions must not be exceeded in order to ensure correct
operation and reliability of the TC1728. All parameters specified in the following tables
refer to these operating conditions, unless otherwise noticed.
Digital supply voltages applied to the TC1728 from external must be static regulated
voltages which allow a typical voltage swing of ± 5 %.
All parameters specified in the following tables refer to these operating conditions
(Table 11), unless otherwise noticed in the Note / Test Condition column.
Table 11 Operating Conditions Parameters
Parameter
Symbol
Min.
Values
Typ Max.
.
Unit Note /
Test Condition
Overload coupling
factor for analog
inputs, negative
K_OVAN CC −
− 0.0001
I_OV≥ -2 mA;
I_OV≤ 0 mA; analog
pad= 5.0 V
Overload coupling
factor for analog
inputs, positive
K_OVAP CC −
− 0.00001
I_OV≥ 0 mA;
I_OV≤ 3 mA; analog
pad= 5.0 V
CPU Frequency
f_CPU SR −
FPI Frequency
f_FPI SR −
LMB Frequency
f_LMB SR −
PCP Frequency
f_PCP SR −
Inactive device pin I_ID
current
SR -1
Short circuit current I_SC
of digital outputs¹⁾
SR -5
− 133
− 110
− 133
− 133
−1
−5
MHz
MHz
MHz
MHz
mA All power supply
voltages
V_DDx = 0
mA
Absolute sum of
ΣI_{SC_D} CC −
− 100
mA
short circuit currents
of the device
Absolute sum of
ΣI_{SC_PG} CC −
− 70
mA
short circuit currents
per pin group
Ambient
Temperature
T_A
SR -40 − 125
°C
Data Sheet
5-7
V1.2, 2014-06