TC1115 Datasheet, PDF (76/103 Pages) Infineon Technologies AG – 32-Bit Single-Chip Microcontroller Advance Information

TC1115
Advance Information
Electrical Parameters
4.1.3 Operating Condition
The following operating conditions must be complied with in order to ensure correct
operation of the TC1115. All parameters specified in the following table refer to these
operating conditions, unless otherwise indicated.
Parameter
Symbol Limit Values
min.
max.
Unit Notes
Conditions
Digital supply voltage
V_DD
1.43
V_DDP
3.14
Digital ground voltage
V_SS
Digital core supply current I_DD
–
Ambient temperature under T_A
-40
bias
CPU clock
f_SYS
–¹⁾
Overload current
I_OV
-1
-3
Short circuit current
I_SC
-1
-3
Absolute sum of overload + Σ|I_OV| + –
short circuit currents
|I_SC|
1.58
3.47
0
525
+85
150
1
3
1
3
|50|
|100|
V–
V–
V–
mA –
°C –
MHz –
mA ²⁾³⁾
duty cycle ≤ 25%
mA ⁴⁾
duty cycle ≤ 25%
mA ³⁾
duty cycle ≤ 25%
Inactive device pin current I_ID
(V_DD = V_DDP = 0)
External load capacitance C_L
ESD strength
–
-1
1
–
50
2000 –
mA –
pF –
V Human Body
Model (HBM)
1) _{The TC1115 uses a static design, so the minimum operation frequency is 0 MHz. However, due to test time}
restriction no lower frequency boundary is tested.
2) _{Overload conditions occur if the standard operating conditions are exceeded, i.e. the voltage on any pin}
exceeds the specified range (i.e. V_OV > V_DDP + 0.5 V or V_OV < V_SS - 0.5 V). The absolute sum of input
overload currents on all digital I/O pins may not exceed 50 mA. The supply voltage must remain within the
specified limits.
3) _{Not subject to production test, verified by design/characterization.}
4) _{Applicable for digital inputs.}
Data Sheet
70
V1.0, 2005-02