English
Language : 

TC1115 Datasheet, PDF (34/103 Pages) Infineon Technologies AG – 32-Bit Single-Chip Microcontroller Advance Information
TC1115
Advance Information
Functional Description
Features:
The FPI Bus is designed with the requirements of high-performance systems in mind.
The features are:
• Core independent
• Multimaster capability (up to 16 masters)
• Demultiplexed operation
• Clock synchronous
• Peak transfer rate of up to 800 Mbytes/sec (@ 100 MHz bus clock)
• Address and data bus scalable (address bus up to 32 bits, data bus up to 64 bits)
• 8-/16-/32- and 64-bit data transfers
• Broad range of transfer types from single to multiple data transfers
• Split transaction support for agents with long response time
• Burst transfer capability
• EMI and power consumption minimized
3.4.3 LFI
The LMB-to-FPI Interface (LFI) block provides the circuitry to interface (bridge) the FPI
bus and the Local Memory Bus (LMB).
LFI Features:
• Full support for bus transactions found within current TriCore™ 1.3 based systems:
– Single 8/16/32-bit Write/Read transfers from FPI to LMB
– Single 8/16/32/64-bit Write/Read transfers from LMB to FPI
– Read-Modify-Write transfers of 8/16/32-bit in both directions
– Burst transactions of 2, 4 or 8 data beats from the FPI to the LMB
– Burst transactions of 2 or 4 data beats from the LMB to the FPI
• Address decoding and translation as required by TriCore™ 1.3 implementation
• FPI master interface supports full pipelining on FPI bus
• LMB master interface supports pipelining on LMB within the scope of the LMB
specification
• FPI master interface can act as default master on FPI bus
• Programmable support for split LMB to FPI read transactions
• Retry generation on both FPI and LMB buses
• Full support for abort, retry, error and FPI timeout conditions
• Flexible LMB/FPI clock ratio support including dynamic clock switching support
• LFI core clock may be shut down when no transactions are being issued to LFI from
either bus and the LFI has no transactions in progress, thus saving power.
Data Sheet
28
V1.0, 2005-02