ICB2FL03G Datasheet, PDF (45/60 Pages) Infineon Technologies AG – 2nd Generation FL Controller for Fluorescent Lamp Ballasts

5.3
Characteristics
ICB2FL03G
Controller for Fluorescent Lamp Ballasts
Electrical Characteristics
5.3.1 Power Supply Section
The electrical characteristics involve the spread of values guaranteed within the specified supply voltage and
junction temperature range T_J from –25 °C to +125 °C. Typical values represent the median values, which are
related to 25 °C. Unless otherwise stated, a supply voltage of 15 V and V_HSVCC = 15 V is assumed and the IC
operates in active mode. Furthermore, all voltages refer to GND if not otherwise stated.
Parameter
Symbol
VCC Quiescent Current1
VCC Quiescent Current2
VCC Supply Current¹⁾
VCC Supply Current in Latched
Fault Mode
I_VCCqu1
I_VCCqu2
I_VCCSupply
I_VCCLatch
LSVCC Turn-On Threshold
LSVCC Turn-Off Threshold
LSVCC Turn-On/Off Hyst.
VCC Zener Clamp Voltage
VCC Zener Clamp Current
High Side Leakage Current
HSVCC Quiescent Current
HSVCC Quiescent Current¹⁾
HSVCC Turn-On Threshold
HSVCC Turn-Off Threshold
HSVCC Turn-On/Off Hyst.
Low Side Ground
V_VCCOn
V_VCCOff
V_VCCHys
V_VCCClamp
I_VCCZener
I_HSGNDleak
I_HSVCCqu12)
I_HSVCCqu22)
V_HSVCCOn2)
V_HSVCCOff2)
V_HSVCCHy2)
GND
1) With inactive gate
2) Referring to High Side Ground (HSGND)
Limit Values
min. typ. max.
– 90 130
– 120 160
– 4.2 6.0
– 110 170
Unit
Test Conditions
μA V_VCC = V_VCCOff – 0.5V
μA V_VCC = V_VCCOn – 0.5V
mA V_PFCVS > 2.725V
μA V_RES = 5V
13.5 14.0 14.5
10.0 10.6 11.0
3.2 3.6 4.0
15.5 16.3 16.9
2.5 –
5
– 0.01 2
– 190 280
0.3 0.65 1.2
9.8 10.4 11.0
8.1 8.6 9.3
1.4 1.7 2.0
V Hysteresis
V
V
V I_VCC = 2mA/V_RES = 5V
mA V_VCC = 17.5V/V_RES = 5V
μA V_HSGND = 650V, V_GND=0V
μA V_HSVCC = V_HSVCCOn – 0.5V
mA V_HSVCC > V_HSVCCOn
V Hysteresis
V
V
Final Data Sheet
45
V1.1, 2013-08-14