ICB2FL03G Datasheet, PDF (44/60 Pages) Infineon Technologies AG – 2nd Generation FL Controller for Fluorescent Lamp Ballasts

ICB2FL03G
Controller for Fluorescent Lamp Ballasts
Electrical Characteristics
5.2
Operating Range
The IC operates as described in the functional description once the values listed here lie within the operating
range.
Parameter
Symbol
Limit Values
min. max.
HSVCC Supply Voltage
V_HSVCC
V_HSVCCOff
HSGND Voltage
V_HSGND
–650
VCC Voltage @ 25°C
V_VCC
V_VCCOff
VCC Voltage @ 125°C
V_VCC
V_VCCOff
LSCS Voltage Range
V_LSCS
–4
PFCVS Voltage Range
V_PFCVS
0
PFCCS Voltage Range
V_PFCCS
–4
PFZCD Current Range
I_PFCZCD
–3
LVS Voltage Range
LVS Current Range
V_LVS
–6
I_LVS
3)
LVS Current Range
I_LVS
–2.5
RFPH Frequency
F_RFPHrange
F_RUN
RFPH Source Current Range
I_RFPH
–500
RTPH Voltage Range
V_RTPH
0
Junction Temperature
T_j
–25
Adjustable Preheating Freq.
F_RFPH
F_RFRUN
Adjustable Run Frequency
F_RFRUN
20
Adjustable Preheating Time
t_RTPH
0
Set Resistor for Run Feq.
R_RFRUN
4
Set Resistor for Preheat Feq.
R_RFPH
4
Set Resistor for Preheat Time R_RTPH
0
Mains Frequency
f_Mains
45
1) Limitation due to creeping distance between the HS&LS Pins
2) Limited by Maximum of Current Range at LVS
3) Limited by Minimum of Voltage Range at LVS
17.5
650
17.5
18.0
5
4
5
3
6²⁾
210
2.5
150
0
2.5
125
150
120
2500
25
–
25
65
Unit
Remarks
V Referring to HSGND
V Referring to GND¹⁾
V T_J = 25°C
V T_J = 125°C
V In active mode
V
V In active mode
mA In active mode
V
μA IC Power Down Mode
mA IC active mode
kHz
μA @ V_RFPH = 2.5 V
V
°C
kHz Range set by RFPH
kHz Range set by RFRUN
ms Range set by RTPH
kΩ
kΩ R_RFRUN parallel to R_RFPH
kΩ
Hz NOTCH Filter Operation
Final Data Sheet
44
V1.1, 2013-08-14