XC2723X Datasheet, PDF (15/109 Pages) Infineon Technologies AG – 16/32-Bit Single-Chip Microcontroller with 32-Bit Performance

XC2723X
XC2000 Family / Econo Line
General Device Information
Key to Pin Definitions
• Ctrl.: The output signal for a port pin is selected by bit field PC in the associated
register Px_IOCRy. Output O0 is selected by setting the respective bit field PC to
1x00_B, output O1 is selected by 1x01_B, etc.
Output signal OH is controlled by hardware.
• Type: Indicates the pad type and its power supply domain (B, M).
– St: Standard pad
– Sp: Special pad e.g. XTALx
– DA: Digital IO and analog input
– In: Input only pad
– PS: Power supply pad
Table 6
Pin Definitions and Functions
Pin Symbol
Ctrl. Type Function
1 TESTM
I
In/B Testmode Enable
Enables factory test modes, must be held HIGH for
normal operation (connect to V_DDPB).
An internal pullup device will hold this pin high
when nothing is driving it.
2 TRST
I
In/B Test-System Reset Input
For normal system operation, pin TRST should be
held low. A high level at this pin at the rising edge
of PORST activates the XC2723X’s debug
system. In this case, pin TRST must be driven low
once to reset the debug system.
An internal pulldown device will hold this pin low
when nothing is driving it.
3 P6.3
O0 / I St/B Bit 3 of Port 6, General Purpose Input/Output
CCU63_COU O1 St/B CCU63 Channel 2 Output
T62
T3OUT
O2 St/B GPT12E Timer T3 Toggle Latch Output
U1C1_SELO O3 St/B USIC1 Channel 1 Select/Control 0 Output
0
U1C1_DX2D I
St/B USIC1 Channel 1 Shift Control Input
ADC0_REQT I
RyF
St/B External Request Trigger Input for ADC0/1
Data Sheet
11
V1.2, 2012-07