BTC50010-1TAA_15 Datasheet, PDF (11/31 Pages) Infineon Technologies AG – High-Side Power Connector

BTC50010-1TAA
General Product Characteristics
2. Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are not
designed for continuous repetitive operation.
4.2
Functional Range
Table 3 Functional Range
T_J = 25 °C, all voltages and currents refer to definitions in Figure 4 (unless otherwise specified).
Parameter
Symbol
Values
Unit Note /
Min. Typ. Max.
Test Condition
Number
Nominal operating voltage
Extended static operating
voltage
V_{S_OP}
8
V_{S_OP_EXT} 5
–
18
V
–
P_4.2.1
–
28
V
1) 2) _{IL ≤ IL(NOM)}
P_4.2.2
Extended operating voltage V_{S_DYN}
3.2
–
contain dynamic
undervoltage capability
28
V
1) _{VS decreasing P_4.2.3}
according to
ISO7637
according to LV124
Static undervoltage level
V_{S_UV}
–
(start of loss of functionality)
–
4.5
V
R_L=270 Ω
P_4.2.4
V_S decreasing
V_DS ≤ 0.5 V
I_{CP_ON} = 0 µA
Figure 5
Undervoltage restart level
static
V_{S_UV_Restart} –
–
5
V
R_L=270 Ω
V_S increasing
V_DS ≤ 0.5 V
I_{CP_ON} = 0 µA
Figure 5
P_4.2.5
Charge pump current in ON
state (maximum allowed
leakage current at CP pin)
I_{CP_ON}
0
2
µA V_IN = 0 V, t > t_ON P_4.2.6
Maximum allowed Current in I_{IN_OFF}
–
OFF state
IN pins High
–
30
µA Pull-up current flow P_4.2.7
through internal
current source
1) Not subject to production test, specified by design.
2) Within the range of V_{S_OP_EXT} and out of the range of V_{S_OP}, device parameter deviation is possible.
Note: Within the functional range the IC operates as described in the circuit description. The electrical
characteristics are specified within the conditions given in the related electrical characteristics table.
Data Sheet
Connect FET
11
1.3, 2015-02-06