71V3558S200PFG Datasheet, PDF (28/28 Pages) Integrated Device Technology – 128K x 36, 256K x 18 3.3V Synchronous ZBT SRAMs 3.3V I/O, Burst Counter Pipelined Outputs

IDT71V3556, IDT71V3558, 128K x 36, 256K x 18, 3.3V Synchronous SRAMS with
ZBT™ Feature, 3.3V I/O, Burst Counter, and Pipelined Outputs
Commercial and Industrial Temperature Ranges
Datasheet Document History
6/30/99
8/23/99
10/4/99
12/31/99
04/30/00
05/26/00
07/26/00
10/25/00
1/24/02
9/30 /04
10/18/06
08/11/08
10/14/10
Pg. 4, 5
Pg. 6
Pg. 14
Pg. 15
Pg. 22
Pg. 24
Pg. 14
Pg. 15
Pg. 5, 6
Pg. 6
Pg. 5,6, 7
Updated to new format
Added Smart ZBT functionality
Added Note 4 and changed Pins 38, 42, and 43 to DNU
Changed U2–U6 to DNU
Added Smart ZBT AC Electrical Characteristics
Improved tCD and tOE(MAX) at 166MHz
Revised tCHZ(MIN) for f ≤ 133 MHz
Revised tOHZ (MAX) for f ≤ 133 MHz
Improved tCH, tCL for f ≤ 166 MHz
Improved setup times for 100–200 MHz
Added BGA package diagrams
Added Datasheet Document History
Revised AC Electrical Characteristics table
Revised tCHZ to match tCLZ and tCDC at 133MHz and 100MHz
Removed Smart functionality
Added Industrial Temperature range offerings at the 100 to 166MHz speed grades.
Insert clarification note to Recommended Operating Temperature and Absolute Max
Ratings tables
Add BGA capacitance table
Add note to TQFP and BGA Pin Configurations; corrected typo in pinout
Pg. 21
Pg. 23
Pg. 5-8
Pg. 8
Pg. 23
Pg. 8
Pg. 1-8, 15,22,23,27
Pg. 7
Pg. 27
Pg. 1, 26
Pg. 1, 15, 16, 27
Pg. 28
Add 100pinTQFP package Diagram Outline
Add new package offering, 13 x 15mm 165 fBGA
Correct 119BGA Package Diagram Outline
Add ZZ sleep mode reference note to BG119, PK100 and BQ165 pinouts
Update BQ165 pinout
Update BG119 package diagram outline dimensions
Remove Preliminary status
Add note to pin N5 on BQ165, reserved for JTAG TRST
Added JTAG "SA" version functionality
Updated pin configuration for the 119 BGA-reordered I/O signals on P6, P7 (128K x 36)
and P7, N6, L6, K7, H6, G7, F6, E7, D6 (256K x 18).
Adding "Restricted hazardous substance device" to ordering information.
Added X generation die step to data sheet.
Remove 200MHz on 128K x 36 configuration.
Removed IDT from the ordering information
CORPORATE HEADQUARTERS
6024 Silver Creek Valley Rd
San Jose, CA 95138
for SALES:
800-345-7015 or 408-284-8200
fax: [phone]
www.idt.com
for Tech Support:
[e-mail]
800-345-7015 or
408/284-4555
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
ZBT^® and Zero Bus Turnaround are trademarks of Integrated Device Technology, Inc. and the architecture is supported by Micron Technology and Motorola Inc.
6.2482