HMT41GA7MFR8A Datasheet, PDF (3/48 Pages) Hynix Semiconductor – DDR3L SDRAM ECC SO-DIMMs Based on 4Gb M-die

Description
204pin ECC-SO-UDIMMs (72bit-wide, Double Data Rate Synchronous DRAM Small Outline Dual In-Line
Memory Modules) are low power, high-speed operation memory modules. These ECC-SD-UDIMMs are
intended for use as computing memory when installed in systems such as embedded systems and servers,
workstations.ECC-SO-DIMMs are running at 533/667/800 MHz clock speed and offering. 8500/10600/
12800 MB/s bandwidth on the primary data bus.
Features
• Power Supply: VDD=1.35V (1.283V to 1.45V)
• VDDQ = 1.35V (1.283V to 1.45V)
• VDDSPD=3.0V to 3.6V
• Functionality and operations comply with the DDR3 SDRAM datasheet
• 8 internal banks
• Data transfer rates: PC3-12800, PC3-10600, PC3-8500
• Bi-directional Differential Data Strobe
• 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly: BL 8 or BC (Burst Chop) 4
• On Die Termination (ODT) supported
• This product is in compliance with the RoHS directive.
Ordering Information
Part Number
Density Organization
HMT41GA7MFR8A-G7/H9/PB 8GB
1Gx72
Component Composition
512Mx8(H5TC4G83MFR)*18
# of
ranks
2
Rev. 0.1 / Jul. 2012
3