English
Language : 

RFM42 Datasheet, PDF (110/110 Pages) –
RFM42:
Parameter
Value
Unit
VDD to GND
VDD to GND on TX Output Pin
–0.3, +3.6
V
R F–0.3, M+8.0 4 2 / 4V 3
Voltage on Digital Control Inputs
–0.3, VDD + 0.3
V
Voltage on Analog Inputs
–0.3, VDD + 0.3
V
Operat7in. gDAesmcbriiepntitoTne:mWpaekrea-tuurpeTRimanegr eanTdA Low Duty Cycle Modes not functional.
–40 to +85
℃
Thermal IImmppaecdtasn:cTeheθseJAfeatures are not supported.
30
℃/W
Junction Temperature TJ
+125
℃
Storage TWeomrkpaerraotuunred:RUansegethTeSTeGxternal microcontroller or the 32 kHz XTAL option on t–h5e5RtoF2+212to5 implemen℃t these
Note: Stresses beyond thfousnecltisiotends.under ―Absolute Maximum Ratings‖ may cause permanent damage to the device. These are
stresRsersaotinlugstioonnl:yWanidll bfuencfitxioendalinopthereatnioenxtofrethveisdioenvi.ce at or beyond these ratings in the operational sections of the
specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device
reliability. Caution: ESD sensitive device.
Power Amplifier may be damaged if switched on without proper load or termination connected.
HOPE MICROELECTRONICS CO.,LTD
Add:4/F, Block B3, East Industrial Area,
Huaqiaocheng, Shenzhen, Guangdong, China
Tel: 86-755-82973805
Fax: 86-755-82973550
Email: sales@hoperf.com
trade@hoperf.com
Website: http://www.hoperf.com
http://hoperf.en.alibaba.com
This document may contain preliminary information and is subject to change by
Hope Microelectronics without notice. Hope Microelectronics assumes no
responsibility or liability for any use of the information contained herein. Nothing
in this document shall operate as an express or implied license or indemnity
under the intellectual property rights of Hope Microelectronics or third parties.
The products described in this document are not intended for use in
implantation or other direct life support applications where malfunction may
result in the direct physical harm or injury to persons. NO WARRANTIES OF
ANY KIND, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MECHANTABILITY OR FITNESS FOR A ARTICULAR PURPOSE, ARE
OFFERED IN THIS DOCUMENT.
©2006, HOPE MICROELECTRONICS CO.,LTD. All rights reserved.
110
Tel: +86-755-82973805 Fax: +86-755-82973550 E-mail: sales@hoperf.com http://www.hoperf.com