XPC564A Datasheet, PDF (45/67 Pages) Freescale Semiconductor, Inc – Evaluation system supporting Freescale MPC564xA microprocessors

The xPC564A Mini-Module contains a footprint for an SMA connector, which
can be used to provide an external clock source to the system.
Jumper Setting Effect
The MPC564xA “EXTAL” signal is connected to the
On
SMA connector on the xPC564A Mini‐Module
Off (default)
The SMA connector on the xPC564A Mini‐Module is
disconnected from the processor
Figure 4-2: System Clock schematic
4.4
General Configuration
J13 – Reset Enable
A RESET push button on the xPC564A Mini-Module can be used to reset the
xPC564A EVB User Manual
41