XPC564A Datasheet, PDF (21/67 Pages) Freescale Semiconductor, Inc – Evaluation system supporting Freescale MPC564xA microprocessors

J16 – LIN1 master selection
Jumper Setting
On
Off (default)
Effect
LIN1 is configured as a master node
LIN1 is configured as a slave node
J22 – LIN1/SCI RxD selection
Controls whether the RxD pin on LIN1 or SCI is connected to the default I/O
pin on the MPC564xA processor.
Jumper Setting Effect
The LIN1 RxD pin is connected to the “RXDA” pin on
1+2
the MPC564xA processor. This should be set if
enabling LIN1.
The SCI RxD pin is connected to the “RXDA” pin on the
2+3
MPC564xA processor.
J25 – LIN1/SCI TxD selection
Controls whether the TxD pin on LIN1 or SCI is connected to the default I/O
pin on the MPC564xA processor.
Jumper Setting Effect
The LIN1 TxD pin is connected to the “TXDA” pin on
1+2
the MPC564xA processor. This should be set if
enabling LIN1.
xPC564A EVB User Manual
17