XPC564A Datasheet, PDF (38/67 Pages) Freescale Semiconductor, Inc – Evaluation system supporting Freescale MPC564xA microprocessors

4 xPC564AADPT324S HARDWARE & JUMPER SETTINGS
4.1
Boot Configuration
The following jumpers affect the operation of the processor as it initially
comes out of the reset state:
J7 – BOOTCFG0 Configuration
Controls the status of the BOOTCFG0 pin
Jumper Setting Effect
1+2
The BOOTCFG0 pin on the processor is pulled up
2+3 (default) The BOOTCFG0 pin on the processor is pulled down
J8 – BOOTCFG1 Configuration
Controls whether the processor boots from internal FLASH or from a serial
interface (CAN, SCI)
Jumper Setting Effect
1+2
The MPC564xA processor uses serial boot mode
2+3 (default) The MPC564xA processor uses internal boot mode
J9 – PLLCFG1 Configuration
Controls the status of the PLLCFG1 pin
Jumper Setting Effect
34
xPC564A EVB User Manual