XPC564A Datasheet, PDF (11/67 Pages) Freescale Semiconductor, Inc – Evaluation system supporting Freescale MPC564xA microprocessors

examples below for the numbering convention used in this manual for jumper
settings.
Figure 2-5: Pin Numbering
3 xPC56XXMB HARDWARE & JUMPER SETTINGS
Please note that this section of the manual is written for revision B of the
xPC56XXMB motherboard. Revision B motherboards are indicated by the
“Rev. B” silkscreen text in the center of the motherboard.
Revision A motherboards have different jumper numbers. These differences
can be found in the table below:
Revision A Revision B Jumper Description
J3
J6, pins 1+2 VSA Tracking Regulator Configuration
J4
J7
VPROG Regulators Control
J5 (pins 1+2) J5
IGN Control
J5 (pins 3+4, J6, pins 3+4, Regulators Enable & Standby
5+6, 7+8) 5+6, 7+8
J36
J4
VIO Peripherals Logic Level
xPC564A EVB User Manual
7