XPC564A Datasheet, PDF (31/67 Pages) Freescale Semiconductor, Inc – Evaluation system supporting Freescale MPC564xA microprocessors

J33 & J34 FlexRay 1 Terminal Resistor Connection
Jumper Setting
On
Off (default)
Effect
Terminal resistors connected
Terminal resistors not connected
J36 – FlexRay Bus Driver 2 Enable
Controls whether the TxD, TxEN, RxD pins on FlexRay channel B is
connected to the default I/O pin on the MPC564xA processor.
Jumper Setting Effect
The TxD pin of the FlexRay Channel A interface is
1+2
connected to the “FR_B_TX” pin of the MPC564xA
processor.
The TxEN pin of the FlexRay Channel A interface is
3+4
connected to the “FR_B_TX_EN” pin of the MPC564xA
processor.
The RxD pin of the FlexRay Channel A interface is
5+6
connected to the “FR_B_RX” pin of the MPC564xA
processor.
J39 – FlexRay Bus Driver 2 Configuration
Controls configuration pins on the FlexRay Bus Driver.
Jumper Setting Effect
xPC564A EVB User Manual
27