XPC564A Datasheet, PDF (29/67 Pages) Freescale Semiconductor, Inc – Evaluation system supporting Freescale MPC564xA microprocessors

Figure 3-7: CAN schematic
3.7
FlexRay
The xPC56XXMB has footprints for two FlexRay interfaces. However, only
one circuit is assembled by default. The FlexRay circuit comprises of two DB9
connectors. DB3 contains signals for both FlexRay channels and is
compatible with major FlexRay tools. DB5 contains channel B signal, thereby
also allowing 2 separate FlexRay connectors for channel A and channel B
operation.
J32 – FlexRay Bus Driver 1 Enable
Controls whether the TxD, TxEN, RxD pins on FlexRay channel A is
xPC564A EVB User Manual
25