XPC564A Datasheet, PDF (23/67 Pages) Freescale Semiconductor, Inc – Evaluation system supporting Freescale MPC564xA microprocessors

J20 – LIN2 VSUP configuration
Jumper Setting
On
Off (default)
Effect
LIN2 VSUP is connected to 12V
LIN2 VSUP is not connected to 12V
J21 – LIN2 master selection
Jumper Setting
On
Off (default)
Effect
LIN2 is configured as a master node
LIN2 is configured as a slave node
J12 – LIN2/SCI RxD selection
Controls whether the RxD pin on LIN2 or SCI is connected to the default I/O
pin on the MPC564xA processor.
Jumper Setting
1+2
2+3 (default)
Effect
The LIN2 RxD pin is connected to the “RXDB” pin on the
MPC564xA processor. This should be set if enabling
LIN2.
The SCI RxD pin is connected to the “RXDB” pin on the
MPC564xA processor.
xPC564A EVB User Manual
19