XPC564A Datasheet, PDF (24/67 Pages) Freescale Semiconductor, Inc – Evaluation system supporting Freescale MPC564xA microprocessors

J19 – LIN2/SCI TxD selection
Controls whether the TxD pin on LIN2 or SCI is connected to the default I/O
pin on the MPC564xA processor.
Jumper Setting
1+2
2+3 (default)
Effect
The LIN2 TxD pin is connected to the “TXDB” pin on the
MPC564xA processor. This should be set if enabling
LIN2.
The SCI TxD pin is connected to the “TXDB” pin on the
MPC564xA processor.
Figure 3-5: LIN2 schematic (Not populated by default)
3.5
SCI
One SCI interface is available on the xPC56XXMB.
20
xPC564A EVB User Manual