XPC564A Datasheet, PDF (30/67 Pages) Freescale Semiconductor, Inc – Evaluation system supporting Freescale MPC564xA microprocessors

connected to the default I/O pin on the MPC564xA processor.
Jumper Setting Effect
The TxD pin of the FlexRay Channel A interface is
1+2
connected to the “FR_A_TX” pin of the MPC564xA
processor.
The TxEN pin of the FlexRay Channel A interface is
3+4
connected to the “FR_A_TX_EN” pin of the MPC564xA
processor.
The RxD pin of the FlexRay Channel A interface is
5+6
connected to the “FR_A_RX” pin of the MPC564xA
processor.
J35 – FlexRay Bus Driver 1 Configuration
Controls configuration pins on the FlexRay Bus Driver.
Jumper Setting Effect
1+2
The BGE pin on the FlexRay Bus Driver is pulled up to 5V
3+4
The STBN pin on the FlexRay Bus Driver is pulled up to
5V
5+6 (default on) The EN pin on the FlexRay Bus Driver is pulled up to 5V
7+8 (default on) The WAKE pin on the FlexRay Bus Driver is pulled down
to GND
26
xPC564A EVB User Manual