|
XPC564A Datasheet, PDF (28/67 Pages) Freescale Semiconductor, Inc – Evaluation system supporting Freescale MPC564xA microprocessors | |||
|
◁ |
On (default)
Off
Enables CAN (L) transceiver
Disables CAN (L) transceiver
J31 â CAN (L) CTE
Jumper Setting Effect
On
Enables CAN transmission
Off (default) Disables CAN transmission
J29 â CAN (L) TxD/RxD Enable
Controls which I/O pins on the MPC564xA processor are connected to the
TxD and RxD pins on CAN (L). If CAN (L) is not used, it is recommended that
all jumpers are removed.
Jumper Setting Effect
The RxD pin of the CAN (L) interface is connected to
1+3
the âCNRXAâ pin of the MPC564xA processor.
3+5 (default)
The RxD pin of the CAN (L) interface is connected to
the âCNRXCâ pin of the MPC564xA processor.
The TxD pin of the CAN (L) interface is connected to
2+4
the âCNTXAâ pin of the MPC564xA processor.
4+6 (default)
The TxD pin of the CAN (L) interface is connected to
the âCNTXCâ pin of the MPC564xA processor.
24
xPC564A EVB User Manual
|
▷ |